TL-N7MD1 Proximity Switch NEW

TL-N7MD1 OMRON Proximity Switch NEW

Data Sheet

TL-N7MD1 Proximity Switch NEW

OMRON Proximity Switch TL-N7MD1

Product Description:

Easy installation, high-speed pulse generator, high-speed rotation control, and more.

Direct mounted to metal (-N Models).

A wealth of models ideal for limit control, counting control, and other applications (-N Models).

Specifications:

Model		TL-Q5MD[]	TL-N7MD[]	TL-N12MD[]	TL-N20MD[]
Sensing distance		5 mm ±10%	7 mm ±10%	12 mm ±10%	20 mm ±10%
Set distance		0 to 4 mm	0 to 5.6 mm	0 to 9.6 mm	0 to 16 mm
Differential travel		10% max. of sensing distance
Detectable object		Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on Data Sheet.)
Standard sensing object		Iron, 18 × 18 × 1 mm	Iron, 30 × 30 × 1 mm	Iron, 40 × 40 × 1 mm	Iron, 50 × 50 × 1 mm
Response frequency *		500 Hz			300 Hz
Power supply voltage		12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
(operating voltage range)
Leakage current		0.8 mA max.
Control	Load current	3 to 100 mA
output	Residual	3.3 V max. (Load current: 100 mA, Cable length: 2 m)
	voltage
Indicators		D1 Models: Operation indicator (red), Setting indicator (green)
		D2 Models: Operation indicator (red)
Operation mode (with		D1 Models: NO, D2 Models: NC
sensing object approaching)		Refer to the timing charts under I/O Circuit Diagrams on Data Sheet for details.
Protection circuits		Load short-circuit protection, Surge suppressor
Ambient temperature range		Operating/Storage: -25 to 70°C (with no icing or condensation)
Ambient humidity range		Operating/Storage: 35% to 95% (with no condensation)
Temperature influence		±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence		±2.5% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance		50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		1,000 VAC for 1 min between current-carrying parts and case
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 500 m/s2	Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
		3 times each in X, Y,
		and Z directions
Degree of protection		IEC 60529 IP67, in-house standards: oil-resistant
Connection method		Pre-wired Models (Standard cable length: 2 m)
Weight (packed state)		Approx. 45 g	Approx. 145 g	Approx. 170 g	Approx. 240 g
Materials	Case	Heat-resistant ABS
	Sensing
	surface
Accessories		Instruction manual	Mounting Bracket,	Mounting Bracket,	Mounting Bracket,
			Mounting phillips screws	Mounting phillips screws	Mounting phillips screws
			(M4 × 25),	(M4 × 30),	(M5 × 40),
			Instruction manual	Instruction manual	Instruction manual

*The response frequency is an average value.

Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.