Skype.me! Živý chat FAQ

Nákupní košík(0)

E2EM-X30MX1 Proximity Switch NEW

20,98 US$

E2EM-X30MX1 OMRON Proximity Switch NEW

Specifikace E2EM-X30MX1 Proximity Switch NEW

Product Description:

Long-distance detection at up to 30 mm enables secure mounting with reduced problems due to workpiece collisions.

No polarity for easy wiring with DC 2-wire models.

Cable protector provided as a standard feature.

Specifications:

Size

M12

M18

M30

Shielded

Shielded

Shielded

Unshielded

Shielded

Unshielded

Model

E2EM-X4X[]

E2EM-X8X[]

E2EM-X16MX[]

E2EM-X15X[]

E2EM-X30MX[]

Sensing distance

4 mm ±10%

8 mm ±10%

16 mm ±10%

15 mm ±10%

30 mm ±10%

Set distance *1

0 to 3.2 mm

0 to 6.4 mm

0 to 12.8 mm

0 to 12 mm

0 to 24 mm

Differential travel

15% max. of sensing distance

Detectable object

Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Datasheet.)

Standard sensing object

Iron, 12 × 12 × 1 mm

Iron, 18 × 18 × 1 mm

Iron, 45 × 45 × 1 mm

Iron, 30 × 30 × 1 mm

Iron, 70 × 70 × 1 mm

Response frequency *2

1 kHz

0.5 kHz

0.4 kHz

0.25 kHz

0.1 kHz

Power supply voltage

12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.

(operating voltage range)

Leakage current

0.8 mA max.

Control

Load

3 to 100 mA

output

current

 

Residual

5 V max. (Load current: 100 mA, Cable length: 2 m)

 

voltage *3

Indicators

X1 Models: Operation indicator (red), Setting indicator (green)

X2 Models: Operation indicator (red)

Operation mode

X1 Models: NO

(with sensing object

X2 Models: NC

approaching)

Refer to Datasheet.

Protection circuits

Surge suppressor, Load short-circuit protection

Ambient temperature range

Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation)

Ambient humidity range

Operating/Storage: 35% to 95% (with no condensation)

Temperature influence

±15% max. of sensing distance at 23°C in the temperature range of -25 to 70°C

Voltage influence

±1% max. of sensing distance at rated voltage in the rated voltage ±15% range

Insulation resistance

50 MΩ min. (at 500 VDC) between current-carrying parts and case

Dielectric strength

1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case

Vibration resistance

Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance

Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions

Degree of protection

IEC 60529 IP67, in-house standards: oil-resistant

Connection method

Pre-wired Models (Standard cable length: 2 m)

Weight (packed state)

Approx. 60 g

Approx. 130 g

Approx. 150 g

Approx. 180 g

Approx. 210 g

Materials

Case

Nickel-plated brass

Sensing

PBT

surface

Clamping

Nickel-plated brass

nuts

Toothed

Zinc-plated iron

washer

Accessories

Instruction manual

*1.Use the Sensor within the range in which the setting indicator (green LED) is ON (except X2 Models).

*2.The response frequency is an average value.

Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.

*3.The residual voltage is 5 V. Make sure that the device connected to the Sensor can withstand the residual voltage. (Refer to Datasheet.)

 

loading...
V následujících případech provedeme zdarma výměnu nebo plné vrácení peněz:

Výrobek nelze použít v záruční době kvůli problémům s kvalitou výrobku

Výrobek je poškozen při přepravě

Výrobek nebyl doručen včas z naší viny


Postup zdarma výměny nebo plného vrácení peněz:

Kupující zašle e-mail našemu zákaznickému servisu s popisem problému a poskytne důkazy (jasné fotografie, snímky obrazovky nebo video)

Problematiku zkontrolujeme do 1 pracovního dne. V případě splnění podmínek provedeme zdarma výměnu nebo plné vrácení peněz do 1-2 pracovních dnů

Pokud je požadována vrácení zboží, náklady na přepravu budou hrazeny námi

E2EM-X30MX1 Proximity Switch NEW

Gross Weight 0.21
credit card