TL-Q5MC2-Z Omron Miniature Proximity Sensor New in box
Specifikace | TL-Q5MC2-Z Miniature Proximity Sensor New |
Omron PLC TL-Q5MC2-Z
Product Description and Specifications :
Shield | Unshielded |
Sensing method | Inductive type |
Sensing distance | 5 mm -10% to +10% |
Setting distance | 0 to 4 mm |
Differential distance | 10% Max. of sensing distance |
Sensing object | Ferrous metal (Sensitivity lowers with non-ferrous metals.) |
Standard sensing object | Iron 15*15*1mm |
Response frequency | DC: 500 Hz (average) |
Response time | 2 ms Max. |
Power supply voltage | 12 to 24 VDC (ripple (p-p) :10% Max.) |
Operating voltage range | 10 to 30 VDC |
Current consumption | 10 mA Max. (at 24VDC) |
Control output (Output type) | NPN open collector output |
Control output (Switching capacity) | 0 to 50 mA (at 30VDC) |
Control output (Residual voltage) | (DC) 1 V Max. (under load current with cable length of 2m) |
Indicator | Detection indicator(red) |
Operation mode | NC |
Protective circuit | Surge suppressor |
Power supply reverce polarity protection | |
Standard or Different frequency | Standard |
Ambient temperature | Operating: -25 to 70 CEL |
Storage: -25 to 70 CEL | |
(with no icing or condensation) | |
Ambient humidity | Operating: 35 to 95 %RH |
Storage: 35 to 95 %RH | |
(with no condensation) | |
Temperature influence | +-20% Max. of sensing distance in temperature range of -25 to +70CEL |
(As the basis for sensing distance of 23CEL) | |
Voltage influence | +-2.5% Max. of sensing distance in rated voltage range +-10%. (As the basis for sensing distance at standard power voltage) |
Insulation resistance | 5 M OHM Min. at 500VDC between charged parts and the case |
Dielectric strength | 500 VAC 50/60 Hz for 1 minute between charged parts and the case |
Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
Shock resistance | 200m/s2 for 10 times each in X, Y, and Z directions |
Degree of protection | IEC60529: IP67 |
Applicable standard (EC Directive (Low Voltage Directive)) | EN60947-1 |
EN60947-5-2 | |
Applicable standard (EC Directive (EMC Directive)) | EMI: EN60947-5-2 |
Emission Enclosure: CISPR11 Group 1 classA | |
EMS: EN60947-5-2 | |
Immunity ESD: IEC61000-4-2 | |
Immunity RF-interference: IEC61000-4-3 | |
Immunity Conducted Disturbance: IEC61000-4-6 | |
Immunity Burst: IEC61000-4-4 | |
CE marking: Equipped | |
Applicable standard (CCC mark) | Not equipped |
Connection method | Pre-wired models (Cable length: 5 m) |
Weight (Packed state) | approx. 130 g |
Material (case) | Heat-resistant ABS resin |
Material (sensing surface) | Heat-resistant ABS resin |
Accessories | Instruction manual |
Výrobek nelze použít v záruční době kvůli problémům s kvalitou výrobku
Výrobek je poškozen při přepravě
Výrobek nebyl doručen včas z naší viny
Kupující zašle e-mail našemu zákaznickému servisu s popisem problému a poskytne důkazy (jasné fotografie, snímky obrazovky nebo video)
Problematiku zkontrolujeme do 1 pracovního dne. V případě splnění podmínek provedeme zdarma výměnu nebo plné vrácení peněz do 1-2 pracovních dnů
Pokud je požadována vrácení zboží, náklady na přepravu budou hrazeny námi
TL-Q5MC2-Z Miniature Proximity Sensor New in box
Gross Weight | 0.13 |
---|