TL-Q5MC1-F-Z OMRON Proximity Switch NEW
Datenblatt | TL-Q5MC1-F-Z Proximity Switch NEW |
OMRON Proximity Switch TL-Q5MC1-F-Z
Product Description:
Easy installation, high-speed pulse generator, high-speed rotation control, and more.
Direct mounted to metal (-N Models).
A wealth of models ideal for limit control, counting control, and other applications (-N Models).
Specifications:
Model | TL-Q2MC1 | TL-Q5MC[] | |
Sensing distance | 2 mm ±15% | 5 mm ±10% | |
Set distance | 0 to 1.5 mm | 0 to 4 mm | |
Differential travel | 10% max. of sensing distance | ||
Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on | ||
Data Sheet.) | |||
Standard sensing object | Iron, 8 × 8 × 1 mm | Iron, 15 × 15 × 1 mm | |
Response time | --- | 2 ms max. | |
Response frequency * | 500 Hz | ||
Power supply voltage | 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. | ||
(operating voltage range) | |||
Current consumption | 15 mA max. at 24 VDC (no-load) | 10 mA max. at 24 VDC | |
Control | Load current | NPN open collector | NPN open collector |
output | 100 mA max. at 30 VDC max. | 50 mA max. at 30 VDC max. | |
| Residual voltage | 1 V max. (under load current of 100 mA with cable | 1 V max. (under load current of 50 mA with cable |
| length of 2 m) | length of 2 m) | |
Indicators | Detection indicator (red) | ||
Operation mode (with | NO | C1 Models: NO | |
sensing object approaching) | C2 Models: NC | ||
| Refer to the timing charts under DC 3-Wire Models on Data Sheet for details. | ||
Protection circuits | Reverse polarity protection, Surge suppressor | ||
Ambient temperature range | Operating/Storage: -10 to 60°C | Operating/Storage: -25 to 70°C | |
(with no icing or condensation) | (with no icing or condensation) | ||
Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||
Temperature influence | ±10% max. of sensing distance at 23°C in the | ±20% max. of sensing distance at 23°C in the | |
temperature range of -10 to 60°C | temperature range of -25 to 70°C | ||
Voltage influence | ±2.5% max. of sensing distance at rated voltage in rated voltage ±10% range | ||
Insulation resistance | 50 MΩ min. (at 500 VDC) between current- | 5 MΩ min. (at 500 VDC) between current-carrying | |
carrying parts and case | parts and case | ||
Dielectric strength | 1,000 VAC for 1 min between current-carrying | 500 VAC, 50/60 Hz for 1 min between current- | |
parts and case | carrying parts and case | ||
Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||
Shock resistance | Destruction: 1,000 m/s2 10 times each in X, Y, and | Destruction: 200 m/s2 10 times each in X, Y, and | |
Z directions | Z directions | ||
Degree of protection | IEC 60529 IP67, | IEC IP67 | |
in-house standards: oil-resistant | |||
Connection method | Pre-wired Models (Standard cable length: 2 m) | ||
Weight (packed state) | Approx. 30 g | Approx. 60 g | |
Materials | Case | Heat-resistant ABS | |
Sensing surface | |||
Accessories | Instruction manual |
|
*The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.
Innerhalb von der Garantie aufgrund von Problemen mit der Produktqualität führt es dazu, dass das Produkt nicht verwendet werden kann
Die Ware wird während des Transports beschädigt
Das Produkt wurde aufgrund unseres Verschuldens nicht rechtzeitig geliefert.
Der Käufer sendet unserem Kundenservice eine E-Mail, um das Problem zu beschreiben und unterstützende Dokumente bereitzustellen (klares Foto, Screenshot oder Video)
Wir überprüfen das Problem innerhalb von 1-3 Werktagen. Wenn der Antrag gerechtet ist, wird innerhalb von 1-2 Tagen kostenloser Ersatz oder Rückerstattung arrangiert
Wenn eine Rücksendung erforderlich ist, wird die Rücksendegebühr von uns bezahlt
TL-Q5MC1-F-Z Proximity Switch NEW
Gross Weight | 0.06 |
---|