Skype.me! Live Chat FAQ

Carrito(0)

E2K-L26MC1 Proximity Switch NEW

US$ 118,00

E2K-L26MC1 OMRON Proximity Switch NEW

Ficha de datos E2K-L26MC1 Proximity Switch NEW

OMRON Proximity Switch E2K-L26MC1          

Product Description:

Mount to bypass pipes.

Fit a wide range of pipe diameters: 8 to 11 mm or 12 to 26 mm

Built-in Amplifiers to save space.

Specifications:

Model

E2K-L13MC1

E2K-L26MC1

Applicable pipes

Materials

Non-metal

Size

Diameter

8 to 11 mm

12 to 26 mm

Thickness

1 mm max.

1.5 mm max.

Detectable object

Liquid *

Repeat accuracy

±0.2 mm max.

Differential travel

0.6 to 5 mm

0.3 to 3 mm

(Reference value, varies with

pipe size and liquid.)

Power supply voltage

12 to 24 VDC (10.8 to 30 VDC), ripple (p-p): 10% max.

(operating voltage range)

Current consumption

12 mA max.

Control output

Load current

100 mA max.

Residual voltage

1 V max. (Load current: 100 mA, Cable length: 2 m)

Sensing liquid position

Indented mark position (For details, refer to Datasheet)

Indicators

Detection indicator (orange)

Ambient temperature range

Operating: 0 to 55°C (with no icing or condensation), Storage: -10 to 65°C (with no icing or condensation)

Ambient humidity range

Operating/Storage: 25% to 85% (with no condensation)

Temperature influence

±4 mm of detection level at 23°C in the temperature range of 0 to 55°C

(with pure water or 20% saline solution)

(±6 mm for E2K-L13MC1 with pure water and a pipe diameter of 8 mm)

Voltage influence

±0.5 mm of detection level at the rated voltage in rated voltage ±10% range

Insulation resistance

50 MΩ min. (at 500 VDC) between current-carrying parts and case

Dielectric strength

500 VAC, 50/60 Hz for 1 min between current-carrying parts and case

Vibration resistance

Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance

Destruction: 500 m/s2 3 times each in X, Y, and Z directions

Degree of protection

IP66 (IEC)

Connection method

Pre-wired Models (Standard cable length: 2 m)

Weight (packed state)

Approx. 70 g

Materials

Case, Cover

Heat-resistant ABS

Cable clamp

NBR

Accessories

Two bands, Four slip-proof tubes, Instruction manual

*Stable detection will not be possible in the following cases. Confirm detection capability with the Sensor installed before actual application.

1. If the specific inductive capacity or the specific electric conductivity of the liquid is too low, the liquid position may not be detected since this sensor is a capacitive sensor.

2. If the quantity of liquid is too low or the change in quantity is too low in comparison to the change in liquid level because the pipe is too thin or the walls of the pipe are too thick.

3. If there is a viscous film on the inner pipe wall, large quantities of foam or air bubbles, or excessive buildup of dirt on the inner pipe wall

 

loading...
Vamos a ofrecer un reemplazo gratuito o un reembolso completo con las siguientes situaciones

El producto no se puede utilizar durante el período de garantía debido a problemas de calidad del producto.

El producto se dañó durante el transporte.

El producto no se entregó a tiempo debido a nuestra razón.


El proceso de reemplazo gratuito o reembolso completo

El comprador manda correo electronico a nuestro servicio al cliente para describir el problema y ofrece prueba documentos(foto clara, captura de pantalla o video)

Revisaremos problema en 1-3 dias laborables. ofreceremos reemplazo gratuito o reembolso completo en 1-2 dias laborables para la situacion que cumple los requisitos

Si se requiere una devolución, nosotros pagaremos la tarifa de envío de devolución

E2K-L26MC1 Proximity Switch NEW

Gross Weight 0.07
credit card