Delta 200W 0.2KW AB Series Servo System (Drive + Motor) ASD-A0211-AB + ECMA-C30602SS New
Fiche technique | Delta 200W 0.2KW AB Series Servo System (Drive |
Delta Servo System AB Series
Features
Specifications
*A wide power range: from 100W to 1.5kW, 1-phase or 3-phase; from 2kW to 3kW, 3-phase *Input power supply: from 100W to 400W, AC 100V ~ 115V; from 100W to 3kW, AC 200V ~ 230V *Frequency characteristics (Responsiveness): 450Hz *Incremental 2500ppr optical encoder *Built-in Position / Speed / Torque control modes *8 internal programmable registers (point-to-point position control) *Various internal control functions for a vast range of applications (as A series) *Different inertia motors, from 1000 r/min to 3000 r/min are connectable. *Brake, oil seal, etc. motor options are available for different kinds of application fileds. *Modbus communication protocol is supported as standard. Communication Interface: RS-232 / RS-485 / RS-422
Servo Drive and Servo Motor Combinations
Power | Servo Drive | Servo Motor |
100W | ASD-A0111-AB ASD-A0121-AB | ECMA-C30401_S (S=8mm) |
200W | ASD-A0211-AB ASD-A0221-AB | ECMA-C30602_S (S=14mm) |
400W | ASD-A0411-AB ASD-A0421-AB | ECMA-C30604_S (S=14mm) ECMA-C30804_7 (7=14mm) ECMA-E31305_S (S=22mm) ECMA-G31303_S (S=22mm) |
750W | ASD-A0721-AB | ECMA-C30807_S (S=19mm) ECMA-G31306_S (S=22mm) |
1000W | ASD-A1021-AB | ECMA-C31010_S (S=22mm) ECMA-E31310_S (S=22mm) ECMA-G31309_S (S=22mm) |
1500W | ASD-A1521-AB | ECMA-E31315_S (S=22mm) |
2000W | ASD-A2023-AB | ECMA-C31020_S (S=22mm) ECMA-E31320_S (S=22mm) ECMA-E31820_S (S=35mm) |
3000W | ASD-A3023-AB | ECMA-E31830_S (S=35mm) |
Specifications
Model: ASD-A_ _ _ _ _ _ | 100W | 200W | 400W | 100W | 200W | 400W | 750W | 1 KW | 1.5KW | 2 KW | 3 KW | ||
01 | 02 | 04 | 01 | 02 | 04 | 07 | 10 | 15 | 20 | 30 | |||
Power supply | Phase / Voltage | None | Three-phase: 170~255VAC, 50 / 60Hz ±5% | Three-phase 170~255VAC, 50 / 60Hz ±5% | |||||||||
Single-phase: 100 -10% ~ 115 +10% VAC, 50 / 60Hz ±5% | Single-phase: 200~255VAC, 50 / 60Hz ±5% | ||||||||||||
Continuous Output Current(Arms) | 2.0 | 3.4 | 6.2 | 0.8 | 1.3 | 2.6 | 4.7 | 6.2 | 8.0 | 9.1 | 13.6 | ||
Cooling System | Natural Air Circulation | Fan Cooling | |||||||||||
Encoder Resolution / Feedback Resolution | 2500ppr / 10000ppr | ||||||||||||
Control of Main Circuit | SVPWM Control | ||||||||||||
Tuning Modes | Auto / Manual | ||||||||||||
Dynamic Brake | Built-in | ||||||||||||
Speed Control Mode | Analog Input Command | Voltage Range | 0 ~ ±10 VDC | ||||||||||
Input Resistance | 10KΩ | ||||||||||||
Time Constant | 2.2μs | ||||||||||||
Speed Control Range | 1:5000 | ||||||||||||
Torque Control Mode | Analog Input Command | Voltage Range | 0 ~ ±10 VDC | ||||||||||
Input Resistance | 10KΩ | ||||||||||||
Time Constant | 2.2μs | ||||||||||||
Communication Interface | RS-232 / RS-485 / RS-422 | ||||||||||||
Environment | Altitude | Altitude 1000m or lower above sea level | |||||||||||
Atmospheric pressure | 86kPa to 106kPa | ||||||||||||
Operating Temperature | 0℃to 55℃ (If operating temperature is above specified range, forced cooling will be required) | ||||||||||||
Storage Temperature | -20℃to 65℃ | ||||||||||||
Humidity | 0 to 90% (non-condensing) | ||||||||||||
IP Rating | IP20 | ||||||||||||
Power System | TN System | ||||||||||||
Standards/Requirement | IEC/EN 61800-5-1, UL 508C, C-tick, TUV |
Model: ECMA Series | C304 | C306 | C308 | C310 | |||
100W | 200W | 400W | 400W | 750W | 1KW | 2KW | |
01 | 02 | 04 | 04 | 07 | 10 | 20 | |
Rated output power (kW) | 0.1 | 0.2 | 0.4 | 0.4 | 0.75 | 1.0 | 2.0 |
Rated torque (N-m) | 0.32 | 0.64 | 1.27 | 1.27 | 2.39 | 3.18 | 6.37 |
Maximum torque (N-m) | 0.96 | 1.92 | 3.82 | 3.82 | 7.16 | 9.54 | 19.11 |
Rated speed (r/min) | 3000 | ||||||
Maximum speed (r/min) | 5000 | ||||||
Rated current (A) | 0.90 | 1.55 | 2.60 | 2.60 | 5.10 | 7.30 | 12.05 |
Maximum current (A) | 2.70 | 4.65 | 7.80 | 7.80 | 15.3 | 21.9 | 36.15 |
Power rating (kW/s) (without brake) | 27.7 | 22.4 | 57.6 | 24.0 | 50.4 | 38.1 | 90.6 |
Rotor moment of inertia (× 10-4kg.m2) (without brake) | 0.037 | 0.177 | 0.277 | 0.68 | 1.13 | 2.65 | 4.45 |
Mechanical time constant (ms) (without brake) | 0.75 | 0.80 | 0.53 | 0.74 | 0.63 | 0.74 | 0.61 |
Torque constant-KT (N-m/A) | 0.36 | 0.41 | 0.49 | 0.49 | 0.47 | 0.44 | 0.53 |
Voltage constant-KE (mV/(r/min)) | 13.6 | 16.0 | 17.4 | 18.5 | 17.2 | 16.8 | 19.2 |
Armature resistance (Ohm) | 9.30 | 2.79 | 1.55 | 0.93 | 0.42 | 0.20 | 0.13 |
Armature inductance (mH) | 24.0 | 12.07 | 6.71 | 7.39 | 3.53 | 1.81 | 1.50 |
Electrical time constant (ms) | 2.58 | 4.30 | 4.30 | 7.96 | 8.37 | 9.30 | 11.4 |
Insulation class | Class A (UL), Class B (CE) | ||||||
Insulation resistance | >100MΩ, DC 500V | ||||||
Insulation strength | 1500V AC, 60 seconds | ||||||
Weight (kg) (without brake) | 0.5 | 1.2 | 1.6 | 2.1 | 3.0 | 4.3 | 6.2 |
Weight (kg) (with brake) | 0.8 | 1.5 | 2.0 | 2.9 | 3.8 | 4.7 | 7.2 |
Max. radial shaft load (N) | 78.4 | 196 | 196 | 245 | 245 | 490 | 490 |
Max. thrust shaft load (N) | 39.2 | 68 | 68 | 98 | 98 | 98 | 98 |
Power rating (kW/s) (with brake) | 25.6 | 21.3 | 53.8 | 22.1 | 48.4 | 30.4 | 82.0 |
Rotor moment of inerti0.81a (× 10-4kg.m2) (with brake) | 0.04 | 0.19 | 0.30 | 0.73 | 1.18 | 3.33 | 4.95 |
Mechanical time constant (ms) (with brake) | 0.81 | 0.85 | 0.57 | 0.78 | 0.65 | 0.93 | 0.66 |
Brake holding torque [Nt-m (min)] | 0.3 | 1.3 | 1.3 | 2.5 | 2.5 | 8.0 | 8.0 |
Brake power consumption (at 20℃) [W] | 7.3 | 6.5 | 6.5 | 8.2 | 8.2 | 19.4 | 19.4 |
Brake release time [ms (Max)] | 5 | 10 | 10 | 10 | 10 | 10 | 10 |
Brake pull-in time [ms (Max)] | 25 | 70 | 70 | 10 | 70 | 70 | 10 |
Vibration grade (um) | 15 | ||||||
Operating temperature | 0℃ to 40℃ | ||||||
Storage temperature | -10℃ to 80℃ | ||||||
Operating humidity | 20% to 90% RH (non-condensing) | ||||||
Storage humidity | 20% to 90% RH (non-condensing) | ||||||
Vibration capacity | 2.5G | ||||||
IP rating | IP65 |
Applications
Cutter/Turret control of machine tool, X-Y table control, sealing machine, feeding machine, carving machine, lathe, high-speed winding machine, cutting applications, textile equipment.
Le produit ne peut pas être utilisé normalement à cause de problèmes de qualité dans la période de garantie
Les marchandises sont endommagées pendant le transport
Si un retour est requis, les frais de retour seront payés par nous
L’acheteur enverra un courriel au personnel du service clientèle pour décrire les problèmes et fournir les documents d’attestation(les photos, les captures d’écran ou les vidéos claires)
Nous examinerons les problèmes dans un délai d’un à trois journées de travail. Pour ceux qui répondent aux exigences, nous fournirons un remplacement gratuit ou un remboursement dans un délai d’un à deux journées de travail
Si les marchandises doivent être retournées, nous payons les frais d'expédition de retour
Delta 200W 0.2KW AB Series Servo System (Drive + Motor) ASD-A0211-AB + ECMA-C30602SS New
Gross Weight | 4 |
---|