TL-N7MD1 Proximity Switch NEW

72,98 $US

Qté :

Mode de livraison

TL-N7MD1 OMRON Proximity Switch NEW

Fiche technique

TL-N7MD1 Proximity Switch NEW

OMRON Proximity Switch TL-N7MD1

Product Description:

Easy installation, high-speed pulse generator, high-speed rotation control, and more.

Direct mounted to metal (-N Models).

A wealth of models ideal for limit control, counting control, and other applications (-N Models).

Specifications:

Model		TL-Q5MD[]	TL-N7MD[]	TL-N12MD[]	TL-N20MD[]
Sensing distance		5 mm ±10%	7 mm ±10%	12 mm ±10%	20 mm ±10%
Set distance		0 to 4 mm	0 to 5.6 mm	0 to 9.6 mm	0 to 16 mm
Differential travel		10% max. of sensing distance
Detectable object		Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on Data Sheet.)
Standard sensing object		Iron, 18 × 18 × 1 mm	Iron, 30 × 30 × 1 mm	Iron, 40 × 40 × 1 mm	Iron, 50 × 50 × 1 mm
Response frequency *		500 Hz			300 Hz
Power supply voltage		12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
(operating voltage range)
Leakage current		0.8 mA max.
Control	Load current	3 to 100 mA
output	Residual	3.3 V max. (Load current: 100 mA, Cable length: 2 m)
	voltage
Indicators		D1 Models: Operation indicator (red), Setting indicator (green)
		D2 Models: Operation indicator (red)
Operation mode (with		D1 Models: NO, D2 Models: NC
sensing object approaching)		Refer to the timing charts under I/O Circuit Diagrams on Data Sheet for details.
Protection circuits		Load short-circuit protection, Surge suppressor
Ambient temperature range		Operating/Storage: -25 to 70°C (with no icing or condensation)
Ambient humidity range		Operating/Storage: 35% to 95% (with no condensation)
Temperature influence		±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence		±2.5% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance		50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		1,000 VAC for 1 min between current-carrying parts and case
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 500 m/s2	Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
		3 times each in X, Y,
		and Z directions
Degree of protection		IEC 60529 IP67, in-house standards: oil-resistant
Connection method		Pre-wired Models (Standard cable length: 2 m)
Weight (packed state)		Approx. 45 g	Approx. 145 g	Approx. 170 g	Approx. 240 g
Materials	Case	Heat-resistant ABS
	Sensing
	surface
Accessories		Instruction manual	Mounting Bracket,	Mounting Bracket,	Mounting Bracket,
			Mounting phillips screws	Mounting phillips screws	Mounting phillips screws
			(M4 × 25),	(M4 × 30),	(M5 × 40),
			Instruction manual	Instruction manual	Instruction manual

*The response frequency is an average value.

Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.

Le remplacement gratuit ou le remboursement complet sera possible dans les circonstances suivantes

Le produit ne peut pas être utilisé normalement à cause de problèmes de qualité dans la période de garantie

Les marchandises sont endommagées pendant le transport

Si un retour est requis, les frais de retour seront payés par nous

Processus du remplacement gratuit ou du remboursement complet

L’acheteur enverra un courriel au personnel du service clientèle pour décrire les problèmes et fournir les documents d’attestation(les photos, les captures d’écran ou les vidéos claires)

Nous examinerons les problèmes dans un délai d’un à trois journées de travail. Pour ceux qui répondent aux exigences, nous fournirons un remplacement gratuit ou un remboursement dans un délai d’un à deux journées de travail

Si les marchandises doivent être retournées, nous payons les frais d'expédition de retour