E2EY-X4C1 OMRON Proximity Switch NEW
Data Sheet | E2EY-X4C1 Proximity Switch NEW |
Product Description:
Non-ferrous metals, such as aluminum and brass, are detected.
Ferrous metals, such as iron and nickel, are not detected.
Aluminum foil, however, cannot be detected.
Specifications:
Model | E2EY-X4C1 | E2EY-X8C1 | |
Sensing distance | 4 mm ±10% | 8 mm ±10% | |
Set distance | 0 to 2.8 mm | 0 to 5.6 mm | |
Differential travel | 20% max. of sensing distance | ||
Detectable object | Non-ferrous metal (Does not detect ferrous metal.) | ||
Standard sensing object | Aluminum: 18 × 18 × 1 mm | Aluminum: 30 × 30 × 1 mm | |
Response frequency * | 70 Hz | ||
Power supply voltage | 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. | ||
(operating voltage range) | |||
Current consumption | 20 mA max. | ||
Control | Load | NPN open-collector output, 100 mA max. (at 30 VDC) | |
output | current | ||
| Residual | 2 V max. (Load current: 100 mA, Cable length: 2 m) | |
| voltage | ||
Indicators | Detection indicator (red) | ||
Operation mode | Load ON: NO (Refer to Datasheet.) | ||
(with sensing object approaching) | |||
Protection circuits | Reverse polarity protection, Load short-circuit protection, Surge suppressor | ||
Ambient temperature range | Operating/Storage: -10 to 55°C (with no icing or condensation) | ||
Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||
Temperature influence | ±20% max. of sensing distance at 23°C in the temperature range of -10 to 55°C | ||
Voltage influence | ±2.5% max. of sensing distance at rated voltage in rated voltage ±15% range | ||
Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||
Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | ||
Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||
Shock resistance | Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions | ||
Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant | ||
Connection method | Pre-wired Models (Standard cable length: 2 m) | ||
Weight (packed state) | Approx. 140 g | Approx. 190 g | |
Materials | Case | Nickel-plated brass | |
Sensing | Heat-resistant ABS | ||
surface | |||
Clamping | Nickel-plated brass | ||
nuts | |||
Toothed | Zinc-plated iron | ||
washer |
The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance
המוצר אינו יכול להשתמש בתקופת האחריות בגלל בעיות איכות המוצר
המוצר נפגם במשלוח
המוצר לא נמסר בזמן בשל סיבתנו
הקונים שולחים אימייל לשירות הלקוחות שלנו כדי לתאר את הבעיה ולספק הוכחות (תמונות ברורות, צילומי מסך או וידאו)
אנו נבדוק את הבעיה ביום עסקים אחד. למקרים המתאימים, נספק החלפה חינם או החזר מלא בתוך 1 ימי עסקים
אם נדרשה החזרה, נשלם את דמי משלוח ההחזרה
E2EY-X4C1 Proximity Switch NEW
Gross Weight | 0.14 |
---|