TL-N20MD1 OMRON Proximity Switch NEW
Data Sheet | TL-N20MD1 Proximity Switch NEW |
OMRON Proximity Switch TL-N20MD1
Product Description:
Easy installation, high-speed pulse generator, high-speed rotation control, and more.
Direct mounted to metal (-N Models).
A wealth of models ideal for limit control, counting control, and other applications (-N Models).
Specifications:
Model | TL-Q5MD[] | TL-N7MD[] | TL-N12MD[] | TL-N20MD[] | |
Sensing distance | 5 mm ±10% | 7 mm ±10% | 12 mm ±10% | 20 mm ±10% | |
Set distance | 0 to 4 mm | 0 to 5.6 mm | 0 to 9.6 mm | 0 to 16 mm | |
Differential travel | 10% max. of sensing distance | ||||
Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on Data Sheet.) | ||||
Standard sensing object | Iron, 18 × 18 × 1 mm | Iron, 30 × 30 × 1 mm | Iron, 40 × 40 × 1 mm | Iron, 50 × 50 × 1 mm | |
Response frequency * | 500 Hz | 300 Hz | |||
Power supply voltage | 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. | ||||
(operating voltage range) | |||||
Leakage current | 0.8 mA max. | ||||
Control | Load current | 3 to 100 mA | |||
output | Residual | 3.3 V max. (Load current: 100 mA, Cable length: 2 m) | |||
| voltage | ||||
Indicators | D1 Models: Operation indicator (red), Setting indicator (green) | ||||
D2 Models: Operation indicator (red) | |||||
Operation mode (with | D1 Models: NO, D2 Models: NC | ||||
sensing object approaching) | Refer to the timing charts under I/O Circuit Diagrams on Data Sheet for details. | ||||
Protection circuits | Load short-circuit protection, Surge suppressor | ||||
Ambient temperature range | Operating/Storage: -25 to 70°C (with no icing or condensation) | ||||
Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||||
Temperature influence | ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C | ||||
Voltage influence | ±2.5% max. of sensing distance at rated voltage in the rated voltage ±15% range | ||||
Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||||
Dielectric strength | 1,000 VAC for 1 min between current-carrying parts and case | ||||
Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||||
Shock resistance | Destruction: 500 m/s2 | Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions | |||
3 times each in X, Y, | |||||
and Z directions | |||||
Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant | ||||
Connection method | Pre-wired Models (Standard cable length: 2 m) | ||||
Weight (packed state) | Approx. 45 g | Approx. 145 g | Approx. 170 g | Approx. 240 g | |
Materials | Case | Heat-resistant ABS | |||
Sensing | |||||
surface | |||||
Accessories | Instruction manual | Mounting Bracket, | Mounting Bracket, | Mounting Bracket, | |
Mounting phillips screws | Mounting phillips screws | Mounting phillips screws | |||
(M4 × 25), | (M4 × 30), | (M5 × 40), | |||
Instruction manual | Instruction manual | Instruction manual |
*The response frequency is an average value.
Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.
המוצר אינו יכול להשתמש בתקופת האחריות בגלל בעיות איכות המוצר
המוצר נפגם במשלוח
המוצר לא נמסר בזמן בשל סיבתנו
הקונים שולחים אימייל לשירות הלקוחות שלנו כדי לתאר את הבעיה ולספק הוכחות (תמונות ברורות, צילומי מסך או וידאו)
אנו נבדוק את הבעיה ביום עסקים אחד. למקרים המתאימים, נספק החלפה חינם או החזר מלא בתוך 1 ימי עסקים
אם נדרשה החזרה, נשלם את דמי משלוח ההחזרה
TL-N20MD1 Proximity Switch NEW
Gross Weight | 0.24 |
---|