loading...
E2E-X7D1S-Z OMRON Proximity Switch NEW
| データシート | E2E-X7D1S-Z Proximity Switch NEW |
Product Description:
Standard Sensors for detecting ferrous metals.
Wide array of variations. Ideal for a variety of applications.
Models with different frequencies are also available to prevent mutual interference.
Superior environment resistance with standard cable made of oilresistant PVC and sensing surface made of material that resists cutting oil.
Specifications:
| Size | M8 | M12 | M18 | M30 | |||||
| Shielded | Shielded | Unshielded | Shielded | Unshielded | Shielded | Unshielded | Shielded | Unshielded | |
| Model | E2E- | E2E- | E2E- | E2E- | E2E- | E2E- | E2E- | E2E- | |
| X2D[] | X4MD[] | X3D[] | X8MD[] | X7D[] | X14MD[] | X10D[] | X20MD[] | ||
| Sensing distance | 2 mm ±10% | 4 mm ±10% | 3 mm ±10% | 8 mm ±10% | 7 mm ±10% | 14 mm ±10% | 10 mm ±10% | 20 mm ±10% | |
| Set distance *1 | 0 to 1.6 mm | 0 to 3.2 mm | 0 to 2.4 mm | 0 to 6.4 mm | 0 to 5.6 mm | 0 to 11.2 mm | 0 to 8 mm | 0 to 16 mm | |
| Differential travel | 15% max. of sensing distance | 10% max. of sensing distance | |||||||
| Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Data Sheet.) | ||||||||
| Standard sensing | Iron, 8 × | Iron, 20 × | Iron, 12 × | Iron, 30 × | Iron, 18 × | Iron, 30 × 30 × 1 mm | Iron, 54 × | ||
| object | 8 × 1 mm | 20 × 1 mm | 12 × 1 mm | 30 × 1 mm | 18 × 1 mm | 54 × 1 mm | |||
| Response frequency | 1.5 kHz | 1 kHz | 0.8 kHz | 0.5 kHz | 0.4 kHz | 0.1 kHz | |||
| *2 | |||||||||
| Power supply voltage | 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. | ||||||||
| (operating voltage | |||||||||
| range) | |||||||||
| Leakage current | 0.8 mA max. | ||||||||
| Control | Load | 3 to 100 mA, Diagnostic output: 50 mA for -D1(5)S Models | |||||||
| output | current | ||||||||
|
| Residual | 3 V max. (Load current: 100 mA, Cable length: 2 m, M1J-T Models only: 5 V max.) | |||||||
|
| voltage | ||||||||
|
| *3 | ||||||||
| Indicators | D1 Models: Operation indicator (red) and setting indicator (green) | ||||||||
| D2 Models: Operation indicator (red) | |||||||||
| Operation mode | D1 Models: NO | ||||||||
| (with sensing object | D2 Models: NC | ||||||||
| approaching) | Refer to Data Sheet. | ||||||||
| Diagnostic output | 0.3 to 1 s | ||||||||
| delay | |||||||||
| Protection circuits | Surge suppressor, Load short-circuit protection (for control and diagnostic output) | ||||||||
| Ambient | Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation) | ||||||||
| temperature range | |||||||||
| Ambient | Operating/storage: 35% to 95% (with no condensation) | ||||||||
| humidity range | |||||||||
| Temperature | ±15% max. of sensing | ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C | |||||||
| influence | distance at 23°C in the | ||||||||
|
| temperature range of -25 | ||||||||
|
| to 70°C | ||||||||
| Voltage influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range | ||||||||
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||||||||
| Dielectric strength | 1000 VAC, 50/60 Hz for 1 minute between current carry parts and case | ||||||||
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||||||||
| Shock resistance | Destruction: 500 m/s2 | Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions | |||||||
| 10 times each in X, Y, and | |||||||||
| Z directions | |||||||||
| Degree of protection | Pre-wired Models: IEC 60529 IP67, in-house standards: oil-resistant | ||||||||
| Connector Models: IEC 60529 IP67 | |||||||||
| Connection method | Pre-wired Models (Standard cable length: 2 m), Connector Models, or Pre-wired Connector Models (Standard cable length: 0.3 m) | ||||||||
| Weight | Pre-wired | Approx. 60 g | Approx. 70 g | Approx. 130 g | Approx. 175 g | ||||
| (packed | Models | ||||||||
| state) | Pre-wired | --- | Approx. 40 g | Approx. 70 g | Approx. 110 g | ||||
|
| Connector | ||||||||
|
| Models | ||||||||
|
| Connector | Approx. 15 g | Approx. 25 g | Approx. 40 g | Approx. 90 g | ||||
|
| Models | ||||||||
| Materi- | Case | Stainless steel (SUS303) | Nickel-plated brass | ||||||
| als | Sensing | PBT | |||||||
|
| surface | ||||||||
|
| Clamping | Nickel-plated brass | |||||||
|
| nuts | ||||||||
|
| Toothed | Zinc-plated iron | |||||||
|
| washer | ||||||||
| Accessories | Instruction manual | ||||||||
*1.Use the E2E within the range in which the setting indicator (green LED) is ON (except D2 Models).
*2.The response frequency is an average value.
Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.
*3.The residual voltage of each M1J-T Model is 5 V. When connecting to a device, make sure that the device can withstand the residual voltage. (Refer to Data Sheet for details.)
以下の場合には、無料で再発行または全額返金を行います:
保証期間中に製品品質の問題により使用できない場合
配送中に製品が損傷した場合
弊社の原因により製品が時間通りに配達されなかった場合
無料再発行または全額返金の手順：
購入者は、問題を説明し、証拠（明確な写真、スクリーンショット、またはビデオ）を提供するために、当社のカスタマーサービスにメールを送信します。
当社は、1営業日以内に問題を確認します。要件を満たす場合は、1〜2営業日以内に無料の再発行または全額返金を提供します。
返品が必要な場合は、当社が返送料を負担します。
E2E-X7D1S-Z Proximity Switch NEW
| Gross Weight | 0.1 |
|---|