TL-N20MD1 Proximity Switch NEW

$48.00

個数:

配送方法

TL-N20MD1 OMRON Proximity Switch NEW

データシート

TL-N20MD1 Proximity Switch NEW

OMRON Proximity Switch TL-N20MD1

Product Description:

Easy installation, high-speed pulse generator, high-speed rotation control, and more.

Direct mounted to metal (-N Models).

A wealth of models ideal for limit control, counting control, and other applications (-N Models).

Specifications:

Model		TL-Q5MD[]	TL-N7MD[]	TL-N12MD[]	TL-N20MD[]
Sensing distance		5 mm ±10%	7 mm ±10%	12 mm ±10%	20 mm ±10%
Set distance		0 to 4 mm	0 to 5.6 mm	0 to 9.6 mm	0 to 16 mm
Differential travel		10% max. of sensing distance
Detectable object		Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on Data Sheet.)
Standard sensing object		Iron, 18 × 18 × 1 mm	Iron, 30 × 30 × 1 mm	Iron, 40 × 40 × 1 mm	Iron, 50 × 50 × 1 mm
Response frequency *		500 Hz			300 Hz
Power supply voltage		12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
(operating voltage range)
Leakage current		0.8 mA max.
Control	Load current	3 to 100 mA
output	Residual	3.3 V max. (Load current: 100 mA, Cable length: 2 m)
	voltage
Indicators		D1 Models: Operation indicator (red), Setting indicator (green)
		D2 Models: Operation indicator (red)
Operation mode (with		D1 Models: NO, D2 Models: NC
sensing object approaching)		Refer to the timing charts under I/O Circuit Diagrams on Data Sheet for details.
Protection circuits		Load short-circuit protection, Surge suppressor
Ambient temperature range		Operating/Storage: -25 to 70°C (with no icing or condensation)
Ambient humidity range		Operating/Storage: 35% to 95% (with no condensation)
Temperature influence		±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence		±2.5% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance		50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		1,000 VAC for 1 min between current-carrying parts and case
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 500 m/s2	Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
		3 times each in X, Y,
		and Z directions
Degree of protection		IEC 60529 IP67, in-house standards: oil-resistant
Connection method		Pre-wired Models (Standard cable length: 2 m)
Weight (packed state)		Approx. 45 g	Approx. 145 g	Approx. 170 g	Approx. 240 g
Materials	Case	Heat-resistant ABS
	Sensing
	surface
Accessories		Instruction manual	Mounting Bracket,	Mounting Bracket,	Mounting Bracket,
			Mounting phillips screws	Mounting phillips screws	Mounting phillips screws
			(M4 × 25),	(M4 × 30),	(M5 × 40),
			Instruction manual	Instruction manual	Instruction manual

*The response frequency is an average value.

Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.

In the following cases, we will make a free reissue or full refund

Product cannot use in warranty period because of product quality problems

Product is damaged in transit

Product is not delivered in time because of our reason

Process of free reissue or full refund

Buyers send an email to our customer service([email protected]) to describe the problem, and to provide evidence (clear photos, screenshots, or video)

We will check the problem in 1 working days. For those meet the requirements, free reissue or full refund will be made within 1 working days

If a return is required, the return shipping fee will be paid by us

Buyers can apply for return or exchange within 90 days of receipt