loading...
E2E-X8MD1S-Z OMRON Proximity Switch NEW
| 데이터 시트 | E2E-X8MD1S-Z Proximity Switch NEW |
Product Description:
Standard Sensors for detecting ferrous metals.
Wide array of variations. Ideal for a variety of applications.
Models with different frequencies are also available to prevent mutual interference.
Superior environment resistance with standard cable made of oilresistant PVC and sensing surface made of material that resists cutting oil.
Specifications:
| Size | M8 | M12 | M18 | M30 | |||||
| Shielded | Shielded | Unshielded | Shielded | Unshielded | Shielded | Unshielded | Shielded | Unshielded | |
| Model | E2E- | E2E- | E2E- | E2E- | E2E- | E2E- | E2E- | E2E- | |
| X2D[] | X4MD[] | X3D[] | X8MD[] | X7D[] | X14MD[] | X10D[] | X20MD[] | ||
| Sensing distance | 2 mm ±10% | 4 mm ±10% | 3 mm ±10% | 8 mm ±10% | 7 mm ±10% | 14 mm ±10% | 10 mm ±10% | 20 mm ±10% | |
| Set distance *1 | 0 to 1.6 mm | 0 to 3.2 mm | 0 to 2.4 mm | 0 to 6.4 mm | 0 to 5.6 mm | 0 to 11.2 mm | 0 to 8 mm | 0 to 16 mm | |
| Differential travel | 15% max. of sensing distance | 10% max. of sensing distance | |||||||
| Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Data Sheet.) | ||||||||
| Standard sensing | Iron, 8 × | Iron, 20 × | Iron, 12 × | Iron, 30 × | Iron, 18 × | Iron, 30 × 30 × 1 mm | Iron, 54 × | ||
| object | 8 × 1 mm | 20 × 1 mm | 12 × 1 mm | 30 × 1 mm | 18 × 1 mm | 54 × 1 mm | |||
| Response frequency | 1.5 kHz | 1 kHz | 0.8 kHz | 0.5 kHz | 0.4 kHz | 0.1 kHz | |||
| *2 | |||||||||
| Power supply voltage | 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. | ||||||||
| (operating voltage | |||||||||
| range) | |||||||||
| Leakage current | 0.8 mA max. | ||||||||
| Control | Load | 3 to 100 mA, Diagnostic output: 50 mA for -D1(5)S Models | |||||||
| output | current | ||||||||
|
| Residual | 3 V max. (Load current: 100 mA, Cable length: 2 m, M1J-T Models only: 5 V max.) | |||||||
|
| voltage | ||||||||
|
| *3 | ||||||||
| Indicators | D1 Models: Operation indicator (red) and setting indicator (green) | ||||||||
| D2 Models: Operation indicator (red) | |||||||||
| Operation mode | D1 Models: NO | ||||||||
| (with sensing object | D2 Models: NC | ||||||||
| approaching) | Refer to Data Sheet. | ||||||||
| Diagnostic output | 0.3 to 1 s | ||||||||
| delay | |||||||||
| Protection circuits | Surge suppressor, Load short-circuit protection (for control and diagnostic output) | ||||||||
| Ambient | Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation) | ||||||||
| temperature range | |||||||||
| Ambient | Operating/storage: 35% to 95% (with no condensation) | ||||||||
| humidity range | |||||||||
| Temperature | ±15% max. of sensing | ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C | |||||||
| influence | distance at 23°C in the | ||||||||
|
| temperature range of -25 | ||||||||
|
| to 70°C | ||||||||
| Voltage influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range | ||||||||
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||||||||
| Dielectric strength | 1000 VAC, 50/60 Hz for 1 minute between current carry parts and case | ||||||||
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||||||||
| Shock resistance | Destruction: 500 m/s2 | Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions | |||||||
| 10 times each in X, Y, and | |||||||||
| Z directions | |||||||||
| Degree of protection | Pre-wired Models: IEC 60529 IP67, in-house standards: oil-resistant | ||||||||
| Connector Models: IEC 60529 IP67 | |||||||||
| Connection method | Pre-wired Models (Standard cable length: 2 m), Connector Models, or Pre-wired Connector Models (Standard cable length: 0.3 m) | ||||||||
| Weight | Pre-wired | Approx. 60 g | Approx. 70 g | Approx. 130 g | Approx. 175 g | ||||
| (packed | Models | ||||||||
| state) | Pre-wired | --- | Approx. 40 g | Approx. 70 g | Approx. 110 g | ||||
|
| Connector | ||||||||
|
| Models | ||||||||
|
| Connector | Approx. 15 g | Approx. 25 g | Approx. 40 g | Approx. 90 g | ||||
|
| Models | ||||||||
| Materi- | Case | Stainless steel (SUS303) | Nickel-plated brass | ||||||
| als | Sensing | PBT | |||||||
|
| surface | ||||||||
|
| Clamping | Nickel-plated brass | |||||||
|
| nuts | ||||||||
|
| Toothed | Zinc-plated iron | |||||||
|
| washer | ||||||||
| Accessories | Instruction manual | ||||||||
*1.Use the E2E within the range in which the setting indicator (green LED) is ON (except D2 Models).
*2.The response frequency is an average value.
Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.
*3.The residual voltage of each M1J-T Model is 5 V. When connecting to a device, make sure that the device can withstand the residual voltage. (Refer to Data Sheet for details.)
다음 경우에는 무상 재발급 또는 전액 환불을 진행합니다
제품의 품질 문제로 보증 기간 내에 사용할 수 없는 경우
운송 중에 제품이 손상된 경우
우리의 이유로 제품이 제때 배달되지 않은 경우
무상 재발급 또는 전액 환불 절차:
구매자는 문제를 설명하고 증거(명확한 사진, 스크린샷 또는 동영상)를 제공하기 위해 고객 서비스에 이메일을 보냅니다.
우리는 1 영업일 이내에 문제를 확인합니다. 자격이 충족되는 경우, 1-2 영업일 이내에 무상 교체 또는 전액 환불을 제공합니다.
반품이 필요한 경우, 반품 운송료는 우리가 부담합니다.
E2E-X8MD1S-Z Proximity Switch NEW
| Gross Weight | 0.1 |
|---|