FS-V31P KEYENCE Fiber amplifier Inventory New

FS-V31P KEYENCE Sensor Inventory New

Product Description:

Strong beam (beam intensity is 64 times that of conventional models)

The world's fastest response speed of 33μs

World's first with the default auto-tracking feature

The world's first energy increase in switch

Stable detection of the end of their life

Specifications:

Light source:

Red, 4-element LED (Wavelength: 640 nm)

Output selection:

LIGHT-ON/DARK-ON (switch-selectable)

Display indicator:

Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) and

Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64512; Excess gain: 0P to 999P,

Hold function: Possible to display both peak and bottom hold values.selectable from 5 variations

Bar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display

Detection mode:

Light intensity (area detection possible, automatic sensitivity-tracking function provided)/

[Limited light intensity/Count check/Abnormality detection] 1

Timer function:

OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectable

Timer duration selectable: 0.1 ms to 9999 ms, Maximum error against the setting value: ±10% max.

Control output:

NPN open-collector 40 V, 100 mA max.2. (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.

PNP open-collector 30 V, 100 mA max.2. (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.

Monitor outpu:

Voltage output: 1 to 5 V 3., Load resistance: 10 kΩ min., Repeatability: ±0.5% of F.S., Response time: 1 ms (FS-V31M only)

External input 4:

Input time: 2 ms (ON)/20 ms (OFF) min.

Unit expansion:

Up to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.

Power supply:

12 to 24 VDC ±10%, ripple: 10% max. Class 2

Current consumption:

Normal operation: 990 mW (at 24 V: 42 mA max, at 12 V: 83 mA max.) / Power-saving mode: 820 mW (at 24 V: 34 mA max, at 12 V: 68 mA max.)

Ambient illumination:

Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.

Ambient temperature:

14 to 131°F (-10 to 55°C), No condensation 5

Relative humidity.:

35 to 85%, No condensation

Vibration:

10 to 55 Hz, double amplitude: 0.06 1.5 mm, 2 hours each in the X, Y and Z axis

Shock:

500 m/s2 in X, Y, and Z directions, 3 times respectively

Housing:

olycarbonate

Size:

1.19 30.3 mm (H) x 0.39 9.8 mm (W) x 2.83 71.8 mm (D)

Accessory:N/A

1. Only 2-output type.

2. Total current of two outputs should be less than 100 mA.

3. Output range:1 to 5 V for the display value 0 to 4096 at HIGH SPEED/FINE/TURBO mode.

4. FS-V31C(P)/V32C(P)/V33(P)/V34(P)