FL2S-4J6HD AZBIL Proximity Switch NEW
Data Sheet | FL2S-4J6HD AZBIL Proximity Switch NEW replacement |
Product Description:
Reduced wiring costs
Stable sensing area displayed by setting indicator
(on N.O. output type only)
Wide range of models available
(4/7/12/20mm, top/side, N.O./N.C.)
High-speed response (1.5kHz at 4mm, 1kHz at 7mm)
Different-frequency types that are only slightly
influenced by mutual interference available for all models
High seal capabilities (IP67)
Enhanced circuit protection
(surge absorption, loadshort-circuit, reverse connection)
Specifications:
Actuation method | High-frequency oscillating type (unshielded) |
Rated supply voltage | 12/24Vdc |
Differential travel | 15% max. of sensing distance |
Operating voltage range | 10 to 30Vdc |
Leakage current | 1mA max. |
Control output | Switching current: 4 to 100mA max. Voltage drop: 3.3V max., Output dielectric strength: 30Vdc |
Hysteresis | 0.05mm max. |
Temperature characteristics | 10% max. of sensing distance for the -25 to +70° range when taking +25° as standard temperature |
Supply voltage characteristics | 1% max. of sensing distance with 15% voltage fluctuation, taking rated supply voltage as standard voltage |
Indicator lamps | N.O. type: Operation indication: lights (red or green) at output ON |
Operating temperature range | -25 to +70°C |
Storage temperature range | -25 to +70°C |
Storage humidity range | 35 to 95% RH |
Insulation resistance | 50MW min. (at 500Vdc) |
Dielectric strength | 500Vac, 50/60Hz for 1 minute |
Vibration resistance | 10 to 55Hz, 1.5mm peak-to-peak amplitude, 2 hrs each in X, Y and Z directions |
Shock resistance | 490m/s2 10 times each in X, Y and Z directions |
Protection | IP67 (IEC standard) |
Circuit protection | Surge absorption, load short-circuit protection, reverse connection protection |
Wiring method | Pre-leaded connector, pre-leaded |
Case material | ABS resin |
Housing | Polyester elastomer |
Holder | Glass-lined polyester resin |
Contact | Gold-plated brass |
المنتج لا يمكن استخدامه في فترة الضمان بسبب مشاكل جودة المنتج
المنتج تالف أثناء الشحن
لم يتم تسليم المنتج في الوقت المحدد بسبب سبب من أسبابنا
يرسل المشترون بريدًا إلكترونيًا إلى خدمة العملاء لدينا لوصف المشكلة وتقديم الأدلة (صور واضحة أو لقطات شاشة أو فيديو).
سنتحقق من المشكلة في يوم عمل واحد. للحالات المؤهلة ، سنقوم بتقديم استبدال مجاني أو استرداد كامل في غضون يومي عمل واحد إلى يومين.
إذا كانت هناك حاجة للإرجاع ، فسيتم دفع رسوم شحن الإرجاع من قبلنا.
FL2S-4J6HD AZBIL Proximity Switch NEW replacement
Gross Weight | 0.1 |
---|