TL-N7MD1 OMRON Proximity Switch NEW
Data Sheet | TL-N7MD1 Proximity Switch NEW |
OMRON Proximity Switch TL-N7MD1
Product Description:
Easy installation, high-speed pulse generator, high-speed rotation control, and more.
Direct mounted to metal (-N Models).
A wealth of models ideal for limit control, counting control, and other applications (-N Models).
Specifications:
Model | TL-Q5MD[] | TL-N7MD[] | TL-N12MD[] | TL-N20MD[] | |
Sensing distance | 5 mm ±10% | 7 mm ±10% | 12 mm ±10% | 20 mm ±10% | |
Set distance | 0 to 4 mm | 0 to 5.6 mm | 0 to 9.6 mm | 0 to 16 mm | |
Differential travel | 10% max. of sensing distance | ||||
Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on Data Sheet.) | ||||
Standard sensing object | Iron, 18 × 18 × 1 mm | Iron, 30 × 30 × 1 mm | Iron, 40 × 40 × 1 mm | Iron, 50 × 50 × 1 mm | |
Response frequency * | 500 Hz | 300 Hz | |||
Power supply voltage | 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. | ||||
(operating voltage range) | |||||
Leakage current | 0.8 mA max. | ||||
Control | Load current | 3 to 100 mA | |||
output | Residual | 3.3 V max. (Load current: 100 mA, Cable length: 2 m) | |||
| voltage | ||||
Indicators | D1 Models: Operation indicator (red), Setting indicator (green) | ||||
D2 Models: Operation indicator (red) | |||||
Operation mode (with | D1 Models: NO, D2 Models: NC | ||||
sensing object approaching) | Refer to the timing charts under I/O Circuit Diagrams on Data Sheet for details. | ||||
Protection circuits | Load short-circuit protection, Surge suppressor | ||||
Ambient temperature range | Operating/Storage: -25 to 70°C (with no icing or condensation) | ||||
Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||||
Temperature influence | ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C | ||||
Voltage influence | ±2.5% max. of sensing distance at rated voltage in the rated voltage ±15% range | ||||
Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||||
Dielectric strength | 1,000 VAC for 1 min between current-carrying parts and case | ||||
Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||||
Shock resistance | Destruction: 500 m/s2 | Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions | |||
3 times each in X, Y, | |||||
and Z directions | |||||
Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant | ||||
Connection method | Pre-wired Models (Standard cable length: 2 m) | ||||
Weight (packed state) | Approx. 45 g | Approx. 145 g | Approx. 170 g | Approx. 240 g | |
Materials | Case | Heat-resistant ABS | |||
Sensing | |||||
surface | |||||
Accessories | Instruction manual | Mounting Bracket, | Mounting Bracket, | Mounting Bracket, | |
Mounting phillips screws | Mounting phillips screws | Mounting phillips screws | |||
(M4 × 25), | (M4 × 30), | (M5 × 40), | |||
Instruction manual | Instruction manual | Instruction manual |
*The response frequency is an average value.
Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.
المنتج لا يمكن استخدامه في فترة الضمان بسبب مشاكل جودة المنتج
المنتج تالف أثناء الشحن
لم يتم تسليم المنتج في الوقت المحدد بسبب سبب من أسبابنا
يرسل المشترون بريدًا إلكترونيًا إلى خدمة العملاء لدينا لوصف المشكلة وتقديم الأدلة (صور واضحة أو لقطات شاشة أو فيديو).
سنتحقق من المشكلة في يوم عمل واحد. للحالات المؤهلة ، سنقوم بتقديم استبدال مجاني أو استرداد كامل في غضون يومي عمل واحد إلى يومين.
إذا كانت هناك حاجة للإرجاع ، فسيتم دفع رسوم شحن الإرجاع من قبلنا.
TL-N7MD1 Proximity Switch NEW
Gross Weight | 0.15 |
---|