TL-Q5MC2-Z Omron Miniature Proximity Sensor New in box
Data Sheet | TL-Q5MC2-Z Miniature Proximity Sensor New |
Omron PLC TL-Q5MC2-Z
Product Description and Specifications :
Shield | Unshielded |
Sensing method | Inductive type |
Sensing distance | 5 mm -10% to +10% |
Setting distance | 0 to 4 mm |
Differential distance | 10% Max. of sensing distance |
Sensing object | Ferrous metal (Sensitivity lowers with non-ferrous metals.) |
Standard sensing object | Iron 15*15*1mm |
Response frequency | DC: 500 Hz (average) |
Response time | 2 ms Max. |
Power supply voltage | 12 to 24 VDC (ripple (p-p) :10% Max.) |
Operating voltage range | 10 to 30 VDC |
Current consumption | 10 mA Max. (at 24VDC) |
Control output (Output type) | NPN open collector output |
Control output (Switching capacity) | 0 to 50 mA (at 30VDC) |
Control output (Residual voltage) | (DC) 1 V Max. (under load current with cable length of 2m) |
Indicator | Detection indicator(red) |
Operation mode | NC |
Protective circuit | Surge suppressor |
Power supply reverce polarity protection | |
Standard or Different frequency | Standard |
Ambient temperature | Operating: -25 to 70 CEL |
Storage: -25 to 70 CEL | |
(with no icing or condensation) | |
Ambient humidity | Operating: 35 to 95 %RH |
Storage: 35 to 95 %RH | |
(with no condensation) | |
Temperature influence | +-20% Max. of sensing distance in temperature range of -25 to +70CEL |
(As the basis for sensing distance of 23CEL) | |
Voltage influence | +-2.5% Max. of sensing distance in rated voltage range +-10%. (As the basis for sensing distance at standard power voltage) |
Insulation resistance | 5 M OHM Min. at 500VDC between charged parts and the case |
Dielectric strength | 500 VAC 50/60 Hz for 1 minute between charged parts and the case |
Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
Shock resistance | 200m/s2 for 10 times each in X, Y, and Z directions |
Degree of protection | IEC60529: IP67 |
Applicable standard (EC Directive (Low Voltage Directive)) | EN60947-1 |
EN60947-5-2 | |
Applicable standard (EC Directive (EMC Directive)) | EMI: EN60947-5-2 |
Emission Enclosure: CISPR11 Group 1 classA | |
EMS: EN60947-5-2 | |
Immunity ESD: IEC61000-4-2 | |
Immunity RF-interference: IEC61000-4-3 | |
Immunity Conducted Disturbance: IEC61000-4-6 | |
Immunity Burst: IEC61000-4-4 | |
CE marking: Equipped | |
Applicable standard (CCC mark) | Not equipped |
Connection method | Pre-wired models (Cable length: 5 m) |
Weight (Packed state) | approx. 130 g |
Material (case) | Heat-resistant ABS resin |
Material (sensing surface) | Heat-resistant ABS resin |
Accessories | Instruction manual |
المنتج لا يمكن استخدامه في فترة الضمان بسبب مشاكل جودة المنتج
المنتج تالف أثناء الشحن
لم يتم تسليم المنتج في الوقت المحدد بسبب سبب من أسبابنا
يرسل المشترون بريدًا إلكترونيًا إلى خدمة العملاء لدينا لوصف المشكلة وتقديم الأدلة (صور واضحة أو لقطات شاشة أو فيديو).
سنتحقق من المشكلة في يوم عمل واحد. للحالات المؤهلة ، سنقوم بتقديم استبدال مجاني أو استرداد كامل في غضون يومي عمل واحد إلى يومين.
إذا كانت هناك حاجة للإرجاع ، فسيتم دفع رسوم شحن الإرجاع من قبلنا.
TL-Q5MC2-Z Miniature Proximity Sensor New in box
Gross Weight | 0.13 |
---|