D4B-4116N OMRON Travel Switch NEW
Data Sheet | D4B-4116N Travel Switch NEW |
OMRON Travel Switch D4B-4116N
Product Description:
Direct opening mechanism (NC contacts only) added to enable opening contacts when faults occur, such as fused contacts.
Equipped with a mechanism that indicates the applicable operating zone, as well as push-button switching to control left and right motion.
Head seal structure strengthened to improve seal properties (TÜV: IEC IP67, UL: NEMA 3, 4, 4X, 6P, and 13).
Wide standard operating temperature range:-40 to 80°C (standard type).
Certified standards: UL, CSA, EN (TÜV), and CCC.
Specifications:
Degree of protection *1 | IP67 (EN60947-5-1) | |
Durability *2 | Mechanical | 30,000,000 operations min. (snap-action) |
10,000,000 operations min. (slow-action) | ||
Electrical | 500,000 operations min. (10 A resistive load at 250 VAC) | |
Operating speed | 1 mm/s to 0.5 m/s | |
Operating frequency | Mechanical | 120 operations/minute |
Electrical | 30 operations/minute | |
Contact resistance | 25 mΩ max. | |
Minimum applicable load *3 | General load 180 mA resistive load at 5 VAC | |
Gold-clad contact 20 mA resistive load at 5 VAC | ||
(N-level reference value) | ||
Rated insulation voltage (Ui) | 600 V (EN60947-5-1) | |
Rated frequency | 50/60 Hz | |
Protection against electric shock | Class I (with ground terminal) | |
Pollution degree (operating environment) | 3 (EN60947-5-1) | |
Impulse withstand voltage | Between terminals | 2.5 kV (snap-action)/4 kV (slow-action) |
(EN60947-5-1) | of same polarity | |
| Between terminals | 4 kV (slow-action) |
| of different polarity | |
| Between each | 4 kV |
| terminal and ground | |
Insulation resistance | 100 MΩ min. (at 500 VDC) between terminals of the same polarity | |
and between each terminal and non-current-carrying part | ||
Contact gap | 2 × 2 mm min. (slow-action) | |
2 × 0.5 mm min. (snap-action) | ||
Vibration resistance | Malfunction | 10 to 55 Hz, 0.75 mm single amplitude |
Shock resistance | Destruction | 1,000 m/s2 min. |
Malfunction | 300 m/s2 min. | |
Conditional short-circuit current | 100 A (EN60947-5-1) | |
Conventional enclosed thermal current (Ithe) | 20 A (EN60947-5-1) | |
Ambient operating temperature | -40 to 80°C (with no icing) | |
Ambient operating humidity | 95% max. | |
Weight | Approx. 250 g |
Note:
1.The above values are initial values.
2.The above values may vary depending on the model. Consult your OMRON sales representative for details.
*2.The durability is for an ambient temperature of 5 to 35°C and ambient humidity of 40% to 70%. For further conditions, consult your OMRON sales representative.
*3.The above values may vary depending on switching frequency, environmental condition, and relativity level, consult your OMRON sales representative.
Продуктът не може да бъде използван по време на гаранционния период поради проблеми с качеството на продукта
Продуктът е повреден по време на транспортирането
Продуктът не е доставен навреме поради наша грешка
Купувачите изпращат имейл до нашия обслужващ персонал, за да опишат проблема и предоставят доказателства (ясни снимки, снимки на екрана или видео)
Ще проверим проблема в рамките на 1 работен ден. За квалифицираните случаи ще осигурим безплатна замяна или пълно възстановяване на сумата в рамките на 1-2 работни дни
Ако е необходимо връщане, разходите за връщане на стоката ще бъдат платени от нас
D4B-4116N Travel Switch NEW
Gross Weight | 0.25 |
---|