Leadshine Differential Brushed DC Servo Drive DCS810 DC18-80V Cont. 10A Peak 20A for 20-400W Brush DC Servo Motor New
Data Sheet | Leadshine Differential Brushed DC Servo Drive |
Introductions:
The DCS810 is very easy to tune and all parameters are visible. Parameter visible tuning tools, including Pro Tuner (Windows based setup software) and STU (Small servo tuning unit) can meet different tuning environments or requirements.
Features:
*18-80VDC, 0-20A, 20-400W.
*Based on DSP control technology and high smooth servo control algorithm.
*Parameter visible tuning tools, including Pro Tuner and STU.
*Feedback resolution X4 encoder line count.
*Position Following error lock range adjustable
*Position error can be eliminated to 1 count, and Velocity error can be eliminated to the Desired Velocity* 0.3%
*Electronic gear ratio from 1/255 to 255
*Built-in motion controller for self-test with trapezoidal velocity profile
*Support PUL/DIR and CW/CCW control signals
*Opto-isolated inputs, support single-ended and differential signals
*10 latest errors self-record function
*Over-current, over-voltage, under-voltage, phase error, encoder error, position following error protections
*Small size, surface-mount technology
Specifications:
Parameters | Min | Typical | Max | Unit |
Peak output current | 0 | - | 20 | A |
Supply voltage | +18 | - | +80 | VDC |
Logic signal current | 7 | 10 | 15 | mA |
Pulse input frequency | 0 | - | 500 | kHz |
Isolation resistance | 500 |
|
| MΩ |
Current provided to encoder | - | - | 50 | mA |
Matching motors:
Drive number | DCS303 | DCS810 | DCS810S |
Motors | 18-30VDC brush DC servo motors with single-ended encoder, power up to 90W | 18-80VDC brush DC servo motors with differential encoder, power up to 400W | 18-80VDC brush DC servo motors with single-ended encoder, power up to 400W |
Applications:
Suitable for a wide range of equipments and instruments such as mini type
engraving machines, jet-ink machines, etc. It performs better in equipments desired
for low noise, high velocity, high precision and high reliability
Other hot items of this Leadshine Brushed servo drives for above applications:
DCS303 | Leadshine Micro-size Brushed DC Servo Drive DCS303 DC18-30V Cont. 3A Peak 15A for 5-90W Brush DC Servo Motor New |
DCS810 | Leadshine Differential Brushed DC Servo Drive DCS810 DC18-80V Cont. 10A Peak 20A for 20-400W Brush DC Servo Motor New |
DCS810S | Leadshine Single-ended Brushed DC Servo Drive DCS810S DC18-80V Cont. 10A Peak 20A for 20-400W Brush DC Servo Motor New |
Продуктът не може да бъде използван по време на гаранционния период поради проблеми с качеството на продукта
Продуктът е повреден по време на транспортирането
Продуктът не е доставен навреме поради наша грешка
Купувачите изпращат имейл до нашия обслужващ персонал, за да опишат проблема и предоставят доказателства (ясни снимки, снимки на екрана или видео)
Ще проверим проблема в рамките на 1 работен ден. За квалифицираните случаи ще осигурим безплатна замяна или пълно възстановяване на сумата в рамките на 1-2 работни дни
Ако е необходимо връщане, разходите за връщане на стоката ще бъдат платени от нас
Leadshine Differential Brushed DC Servo Drive DCS810 DC18-80V Cont. 10A Peak 20A for 20-400W Brush DC Servo Motor New
Gross Weight | 0.21 |
---|