loading...
LQ121S1LH02 Rev.A 12.1" a-Si TFT-LCD,Panel for SHARP
| Data Sheet | LQ121S1LH02 Rev.A 12.1" a-Si TFT-LCD,Panel |
| 品牌 | 夏普(SHARP) |
| 型号 | LQ121S1LH02 |
| 类型 | a-Si TFT-LCD,Panel |
| 尺寸 | 12.1 |
| 分别率 | 800(RGB)×600 (SVGA) |
| 显示模式 | TN, Normally White, Transmissive |
| 表面处理 | Antiglare, Hard coating (2H), Reflection 5.0% (Max.) |
| 亮度 | 70 cd/m2 (Typ.) |
| 对比度 | 300 : 1 (Typ.) (Transmissive) |
| 显示颜色 | 262K (6-bit) |
| 响应时间 | 15/30 (Typ.)(Tr/Td) |
| 可视角度 | 45/45/10/30 (Min.)(CR≥10) (L/R/U/D) |
| 频率 | |
| 光源类型 | CCFL |
| 信号接口 | LVDS (1 ch, 6-bit) |
| 输入电压 | 3.3V (Typ.) |
| RoHS | None RoHS |
| 应用 | Laptop PC |
| 别名 | LQL2LSLLH02 1Q121S11H02 LQ121S1LHO2 |
SHARP LQ121S1LH02 Basic Information
| Panel Brand | SHARP |
|---|---|
| Panel Model | LQ121S1LH02 |
| Panel Type | a-Si TFT-LCD,Panel |
| Application | Laptop PC |
| Operating Temperature | 0 ~ 50 °C |
| Storage Temperature | -25 ~ 60 °C |
| RoHS | None RoHS |
| Specific Feature | Antiglare |
SHARP LQ121S1LH02 Mechanical Features
| Panel Size | 12.1" |
|---|---|
| Dot Resolution | 800(RGB)×600 (SVGA) |
| Pixel Configuration | RGB Vertical Stripe |
| Aspect Ratio | 4:3 (W:H) |
| Form Factor | Flat Display |
| Pixel Pitch | 0.3075×0.3075 mm (W×H) |
| Surface | Antiglare, Hard coating (2H), Reflection 5.0% (Max.) |
| Active Area | 246.0×184.5 mm (W×H) |
| Bezel Area | 250.0×188.5 mm (W×H) |
| Outline Dimension | 275.0×199.0 mm (W×H) |
| Outline Depth | 5.7 (Max.) mm |
| Holes & Brackets | Face mounting holes (2-Φ3.4, 2-R1.7) on left, right bezel |
| Touch Panel | Without |
SHARP LQ121S1LH02 Optical Features
| Display Mode | TN, Normally White, Transmissive |
|---|---|
| Brightness | 70 cd/m2 (Typ.) |
| Contrast Ratio | 300 : 1 (Typ.) (Transmissive) |
| Display Color | 262K (6-bit) |
| Response Time | 15/30 (Typ.)(Tr/Td) |
| Viewing Angle | 45/45/10/30 (Min.)(CR≥10) (L/R/U/D) |
| Viewing Direction | 6 o'clock |
| White color Chromaticity | X:0.313 Y:0.329 |
| White Variation | 1.45 (Max.)(5 points) |
SHARP LQ121S1LH02 Electronics Feature
| Reverse Scan | No |
|---|
SHARP LQ121S1LH02 Backlight System
| Lamp Position | Edge light type (Top side) |
|---|---|
| Lamp Type | CCFL |
| Lamp Amount | 1 pcs |
| Lamp Life Time | 10K(Min.) (Hours) |
| Lamp Voltage | 640V (Typ.) |
| Lamp Current | 2.0/2.5/6.0mA (Min./Typ./Max.) |
| Lamp Operating Frequency | 30/50/60KHz (Min./Typ./Max.) |
| Lamp Startup Voltage | 1350/1450V (Max.)(Ta=+25/0℃) |
| Lamps Power Consumption | 1.6W (Typ.) |
| Lamp Driver Board | No |
| Interface Type | Connector |
| Interface Brand | JST |
| Interface Model | BHSR-02VS-1 |
| Interface Pin Pitch | 3.5 mm |
| Interface Amount | 1 pcs |
| Interface Pins | 2 pins |
| Pin Configuration | BLL-2PINS-HL |
SHARP LQ121S1LH02 Signal Interface
| Signal Category | LVDS |
|---|---|
| Signal Class | LVDS (1 ch, 6-bit) |
| Pin Configuration | LVDS-20P1C6B-070A |
| Input Voltage for Panel | 3.3V (Typ.) |
| Input Current for Panel | 220mA (Typ.) |
| Interface Type | Connector |
| Interface Brand | JAE |
| Interface Model | FI-SEB20P-HF |
| Interface Pin Pitch | 1.25 mm |
| Interface Amount | 1 pcs |
| Interface Pins | 20 pins |
In the following cases, we will make a free reissue or full refund
Product cannot use in warranty period because of product quality problems
Product is damaged in transit
Product is not delivered in time because of our reason
Process of free reissue or full refund
Buyers send an email to our customer service to describe the problem, and to provide evidence (clear photos, screenshots, or video)
We will check the problem in 1 working days. For eligible cases, we will provide a free replacement or full refund within 1-2 business days
If a return is required, the return shipping fee will be paid by us
LQ121S1LH02 Rev.A 12.1" a-Si TFT-LCD,Panel for SHARP
| Gross Weight | 2.8 |
|---|