WL9-2N131 SICK Small photoelectric switch NEW
Data Sheet | WL9-2N131 SICK Small photoelectric switch |
Product Description:
Red-light sender LED as alignment aid
Switching frequency 800/s
Outputs short-circuit protected
Teach-in
Specifications:
Scanning range, max. typical/on refl. | 4 m/PL 80 A |
Supply voltage VS1) | 10...30 V |
Ripple2) | ≤ 5 VSS |
Current consumption 3) | ≤ 30 mA |
Light source | LED, visible red light4) |
Angle of dispersion | 2.5° |
Light spot size | 120 x 120 mm at 3 m |
Switching outputs Q and Q | PNP |
NPN | |
Signal voltage HIGH | VS – 2.9 V |
VS | |
Signal voltage LOW5) | Approx. 0 V |
≤ 2.9 V | |
Output current IA max. | ≤ 100 mA |
Response time6) | ≤ 625 μs |
Max. switching frequency7) | 800/s |
Connection types | Connection cable, 2 m |
Cable, 120 mm, with plug M 12, 4-pin | |
Plug M 12, 4-pin | |
Plug M 8, 4-pin | |
VDE protection class8) | 回 |
Enclosure rating | IP 67 |
Circuit protection9) | A, B, C |
Ambient temperature TA10) | Operation – 40...+ 60 °C |
Storage – 40...+ 75 °C | |
Weight |
|
with connection cable 2 m/120 mm | Approx. 80 g |
with equipment plug M 12/M 8, 4-pin | Approx. 20 g |
1) Limit values
2) Must be within VS tolerances
3) Without load
5) At TA = + 25 °C and 100 mA output current
6) With resistive load
7) With light/dark ratio 1:1
8) Reference voltage 50 V
9) A = supply connections reversepolarity protected
B = outputs short-circuit protected
C = interference suppreasion
10) Do not bent below 0 °C
Product cannot use in warranty period because of product quality problems
Product is damaged in transit
Product is not delivered in time because of our reason
Buyers send an email to our customer service to describe the problem, and to provide evidence (clear photos, screenshots, or video)
We will check the problem in 1 working days. For eligible cases, we will provide a free replacement or full refund within 1-2 business days
If a return is required, the return shipping fee will be paid by us
WL9-2N131 SICK Small photoelectric switch NEW
Gross Weight | 0.08 |
---|