loading...
E2K-F10MC1 Omron Flat Proximity Sensor NEW
| Specifikace | E2K-F10MC1 Flat Proximity Sensor NEW |
Product Description:
DC 3-Wire Model , Flat Type , Unshielded , Sensing Distance 10mm , Operation Mode NO.
Specifications:
| Type | Unshielded |
| Sensing method | Capacitive type |
| Sensing distance | 10 mm -10% to +10% |
| Setting distance | 0 to 7.5 mm |
| Differential distance | 15% Max. of sensing distance |
| Sensing object | Conductor and dielectrics |
| Standard sensing object | With grounded metal 50*50*1mm |
| Response frequency | DC: 100 Hz (average) |
| Power supply voltage | 12 to 24 VDC (ripple(p-p) :10% Max.) |
| Operating voltage range | 10 to 30 VDC |
| Current consumption | 10 mA Max. (at 24VDC) |
| Control output (Output type) | NPN open collector output |
| Control output (Switching capacity) | 0 to 100 mA (at 30VDC) |
| Control output (Residual voltage) | (DC) 1.5 V Max. （under load current with cable length of 2m） |
| Indicator | Detection indicator(red) |
| Operation mode | NO |
| Protective circuit | Surge suppressor |
| Power supply reverse polarity protection | |
| Standard or Different frequency | Standard |
| Ambient temperature | Operating: -10 to 55 CEL |
| Storage: -10 to 55 CEL | |
| (with no icing or condensation) | |
| Ambient humidity | Operating: 35 to 95 %RH |
| Storage: 35 to 95 %RH | |
| (with no condensation) | |
| Temperature influence | +-15% Max. of sensing distance in temperature range of -10 to +55CEL |
| (As the basis for sensing distance of 23CEL) | |
| Voltage influence | +-2.5% Max. of sensing distance in rated voltage range +-10%. (As the basis for sensing distance at standard power voltage) |
| Insulation resistance | 50 M OHM Min. at 500VDC between charged parts and the case |
| Dielectric strength | 500 VAC 50/60 Hz for 1 minute between charged parts and the case |
| Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock resistance | 500m/s2 for 3 times each in X, Y, and Z directions |
| Degree of protection | IEC60529: IP66 |
| Applicable standard (EC Directive (Low Voltage Directive)) | EN60947-1 |
| EN60947-5-2 | |
| Applicable standard (EC Directive (EMC Directive)) | EMI: EN60947-5-2 |
| Emission Enclosure: CISPR11 Group 1 class A | |
| EMS: EN60947-5-2 | |
| Immunity ESD: IEC61000-4-2 | |
| Immunity RF-interference: IEC61000-4-3 | |
| Immunity Conducted Disturbance: IEC61000-4-6 | |
| Immunity Burst: IEC61000-4-4 | |
| CE marking: Equipped | |
| Applicable standard (CCC mark) | Not equipped |
| Connection method | Pre-wired models (Cable length: 2 m) |
| Weight (Packed state) | approx. 35 g |
| Material (case) | Heat-resistant ABS resin |
| Material (sensing surface) | Heat-resistant ABS resin |
| Accessories | Instruction manual |
V následujících případech provedeme zdarma výměnu nebo plné vrácení peněz:
Výrobek nelze použít v záruční době kvůli problémům s kvalitou výrobku
Výrobek je poškozen při přepravě
Výrobek nebyl doručen včas z naší viny
Postup zdarma výměny nebo plného vrácení peněz:
Kupující zašle e-mail našemu zákaznickému servisu s popisem problému a poskytne důkazy (jasné fotografie, snímky obrazovky nebo video)
Problematiku zkontrolujeme do 1 pracovního dne. V případě splnění podmínek provedeme zdarma výměnu nebo plné vrácení peněz do 1-2 pracovních dnů
Pokud je požadována vrácení zboží, náklady na přepravu budou hrazeny námi
E2K-F10MC1 Flat Proximity Sensor NEW
| Gross Weight | 0.035 |
|---|