Xinje 750W 0.75KW Servo System (Motor + Drive) MS-80ST-M02430-20P7 + DS2-20P7 New
Specifikace | Xinje 750W 0.75KW Servo System (Motor + Drive) |
Xinje 750W 0.75KW Servo System (Motor + Drive) MS-80ST-M02430-20P7 + DS2-20P7 New
Features:
Motor MS-80ST-M02430-20P7:
MS series servo motor
Match DS2 series 0.75kw servo drive
Encoder is 2500 ppr
Drive DS2-20P7:
Three control methods, seamless switching: position control, speed control, torque control
Up to 400Hz high speed response, max power 750W
2 channels pulse input,use 24VOC port
2 channels digital input, 2 channels digital output
Two communication ports: RS232, RS485
Perfect protection, safety and reliable
Specifications:
Voltage level | 220V |
Motor type | MS-80ST-M02430_ _-20P7 |
Rated power (KW) | 0.75 |
Rated current (A) | 23.0 |
Rated speed (rpm) | 3000 |
Rated torque (N·m) | 2.39 |
Peak torque (N·m) | 7.1 |
Back EMF constant (V/krpm) | 48 |
Torque coefficient (N·m/A) | 0.8 |
Rotor inertia (Kg·m2) | 0.24×10-3 |
Winding resistor (Ω) | 2.88 |
Winding inductance (mH) | 6.4 |
Electrical time constant (ms) | 2.22 |
Weight (Kg) | 2.86 |
Encoder ppr (PPR) | 3000 |
Pole pairs | 4 |
Motor insulation level | Class B (130 °C) |
Protection level | IP65 |
Ambient temperature | -20 °C~50 °C |
Ambient humidity | Related humidity <90% (no condensation) |
servo type | DS2-20P7 | |
motor | motor code | 0011(default), 0021 |
motor speed(rpm) | rated 3000/max 4000 | |
encoder type | Incremental encoder, 2500 ppr | |
max motor capacity [kW] | 0.75 | |
continuous output current [Arms] | 3 | |
max output current [Arms] | 9 | |
allowable recurring frequency (time/min) | 31 | |
input power | Single phase AC200~240V, 50/60Hz | |
control mode | Three phase full wave rectification IGBT PWM control, sine current drive mode | |
using condition | temperature | 0~+50 °C /-20~+85 °C |
humidity | under 90% RH (no condensation) | |
Vibration resistance/impact resistance | 4.9m/s2 / 19.6m/s2 | |
structure | Foundation installation |
Výrobek nelze použít v záruční době kvůli problémům s kvalitou výrobku
Výrobek je poškozen při přepravě
Výrobek nebyl doručen včas z naší viny
Kupující zašle e-mail našemu zákaznickému servisu s popisem problému a poskytne důkazy (jasné fotografie, snímky obrazovky nebo video)
Problematiku zkontrolujeme do 1 pracovního dne. V případě splnění podmínek provedeme zdarma výměnu nebo plné vrácení peněz do 1-2 pracovních dnů
Pokud je požadována vrácení zboží, náklady na přepravu budou hrazeny námi
Xinje 750W 0.75KW Servo System (Motor + Drive) MS-80ST-M02430-20P7 + DS2-20P7 New
Gross Weight | 5 |
---|