Caricamento...
Informazioni sulla fornitura
Questo prodotto viene ordinato al produttore originale e fornito di nuova produzione, nella confezione originale del produttore.
Il tempo di consegna stimato è generalmente di 20–40 settimane; per alcuni componenti di difficile reperibilità può essere più lungo.
I tempi dipendono dalla pianificazione produttiva del produttore e sono difficili da prevedere con precisione. Seguiremo regolarmente l’avanzamento e faremo il possibile per anticipare la consegna.
LTC3026EDD#TRPBF Analog Devices LDO Linear Regulators - 1 Reel (2500 pcs)
| Scheda tecnica | LTC3026EDD#TRPBF Analog Devices LDO Linear Regulators - 1 Reel (2500 pcs) |
| Manufacturer | Analog Devices |
| Model | LTC3026EDD#TRPBF |
| Category | LDO Linear Regulators |
| Sales Unit | 1 Reel |
| Pack Qty (pcs) | 2500 |
| MOQ (pcs) | 2500 |
| Order Multiple (pcs) | 2500 |
| Device Package | 10-Lead DFN (3mm x 3mm w/ EP) |
| Packing Type | Reel |
| Operating temperature range | -40 to 125 °C |
| Package pin/lead count | 10 pins |
| Package nominal length | 3.0 mm |
| Package nominal width | 3.0 mm |
| Input operating voltage range, internal boost enabled | 1.14 to 3.5 V BOOST ENABLED, LSW = 10 µH VIN must also meet VOUT + dropout Full-temperature specification with E-grade assurance adequate thermal design required |
| Input operating voltage range, external boost supply | 1.14 to 5.5 V BOOST DISABLED, SW = 0 V or floating, external VBST = 5 V (header) VIN must meet output/dropout requirement VBST must meet VOUT + 2.4 V Not applicable to internal boost-enabled mode |
| Adjustable output programming range | 0.4 to 2.6 V Boost enabled or disabled adequate VIN dropout headroom and BST headroom required Full-temperature specification |
| Continuous output current rating | 1.5 A VSHDN = VIN boost enabled or disabled VIN = 1.5 V, VOUT = 1.2 V, CIN = CBST = 1 µF, COUT = 10 µF ceramic Maximum junction temperature constrains simultaneous voltage/current combinations |
| Features | 1.14V to 3.5V (with Boost Enabled) 1.14V to 5.5V (with External 5V Boost) IIN < 1µA (Typ) IBST = 0.1µA (Typ) |
| Low Dropout Voltage | 100mV at IOUT = 1.5A |
| Adjustable Output Range | 0.4V to 2.6V |
| Dropout Voltage | Excellent Supply Rejection Even Near Dropout |
| Operating Modes | Shutdown Disconnects Load from VIN and VBST |
| Low Operating Current | IIN = 950µA at VIN = 1.5V |
| Shutdown Current | Low Shutdown Current: |
| Protection | Short-Circuit, Reverse Current Protected Overtemperature Protected |
LTC3026EDD#TRPBF Analog Devices LDO Linear Regulators - 1 Reel (2500 pcs)
| Peso lordo | 1.643 |
|---|