Caricamento...
Informazioni sulla fornitura
Questo prodotto viene ordinato al produttore originale e fornito di nuova produzione, nella confezione originale del produttore.
Il tempo di consegna stimato è generalmente di 20–40 settimane; per alcuni componenti di difficile reperibilità può essere più lungo.
I tempi dipendono dalla pianificazione produttiva del produttore e sono difficili da prevedere con precisione. Seguiremo regolarmente l’avanzamento e faremo il possibile per anticipare la consegna.
LTC4060EFE#TRPBF Analog Devices Battery Charger ICs - 1 Reel (2500 pcs)
| Scheda tecnica | LTC4060EFE#TRPBF Analog Devices Battery Charger ICs - 1 Reel (2500 pcs) |
| Manufacturer | Analog Devices |
| Model | LTC4060EFE#TRPBF |
| Category | Battery Charger ICs |
| Sales Unit | 1 Reel |
| Pack Qty (pcs) | 2500 |
| MOQ (pcs) | 2500 |
| Order Multiple (pcs) | 2500 |
| Device Package | 16-Lead TSSOP w/ EP |
| Packing Type | Reel |
| Operating ambient temperature range | -40 to 85 °C performance guaranteed from 0°C to 70°C ambient and 0°C to 85°C junction specifications over the -40°C to 85°C operating ambient range assured by design and characterization Separate maximum operating junction temperature is 125°C, not an ambient guarantee |
| Package pin/lead count | 16 pins |
| Operating input voltage range | 4.5 to 10 V VCC input required UVLO threshold depends on cell count full operating range with E-grade assurance |
| Battery charging configuration | 1, 2, 3 or 4 series cells NiMH or NiCd Cell count and chemistry by control pins linear charging through external PNP transistor negative-delta-V termination with timer and overvoltage backup |
| High fast-charge regulated emitter current | 1.9 A (Min.) 2 A (Typ.) 2.1 A (Max.) RPROG=698 ohm, 5 V < VCC < 10 V, VBAT=2.8 V full operating range with E-grade assurance current flows through internal sense resistor into external PNP emitter actual battery current slightly lower depending on transistor alpha |
| Features | No Firmware or Microcontroller Required No Sense Resistor or Blocking Diode Required Automatic Recharge Keeps Batteries Charged Automatic Detection of Battery Optional Temperature Qualified Charging Charge and AC Present Status Outputs Can Drive LED |
| Programmable Fast Charge Current | 0.4A to 2A |
| Accurate Charge Current | ±5% at 2A |
| Output Discharge | Precharge for Heavily Discharged Batteries |
| Operating Modes | Automatic Sleep Mode with Input Supply Removal Manual Shutdown |
| Negligible Battery Drain in Sleep Mode | <1µA |
LTC4060EFE#TRPBF Analog Devices Battery Charger ICs - 1 Reel (2500 pcs)
| Peso lordo | 1.643 |
|---|