loading...
TL-Q5MC2-Z Omron Miniature Proximity Sensor New in box
| Scheda dati | TL-Q5MC2-Z Miniature Proximity Sensor New |
Omron PLC TL-Q5MC2-Z
Product Description and Specifications ：
| Shield | Unshielded |
| Sensing method | Inductive type |
| Sensing distance | 5 mm -10% to +10% |
| Setting distance | 0 to 4 mm |
| Differential distance | 10% Max. of sensing distance |
| Sensing object | Ferrous metal (Sensitivity lowers with non-ferrous metals.) |
| Standard sensing object | Iron 15*15*1mm |
| Response frequency | DC: 500 Hz (average) |
| Response time | 2 ms Max. |
| Power supply voltage | 12 to 24 VDC (ripple (p-p) :10% Max.) |
| Operating voltage range | 10 to 30 VDC |
| Current consumption | 10 mA Max. (at 24VDC) |
| Control output (Output type) | NPN open collector output |
| Control output (Switching capacity) | 0 to 50 mA (at 30VDC) |
| Control output (Residual voltage) | (DC) 1 V Max. (under load current with cable length of 2m) |
| Indicator | Detection indicator(red) |
| Operation mode | NC |
| Protective circuit | Surge suppressor |
| Power supply reverce polarity protection | |
| Standard or Different frequency | Standard |
| Ambient temperature | Operating: -25 to 70 CEL |
| Storage: -25 to 70 CEL | |
| (with no icing or condensation) | |
| Ambient humidity | Operating: 35 to 95 %RH |
| Storage: 35 to 95 %RH | |
| (with no condensation) | |
| Temperature influence | +-20% Max. of sensing distance in temperature range of -25 to +70CEL |
| (As the basis for sensing distance of 23CEL) | |
| Voltage influence | +-2.5% Max. of sensing distance in rated voltage range +-10%. (As the basis for sensing distance at standard power voltage) |
| Insulation resistance | 5 M OHM Min. at 500VDC between charged parts and the case |
| Dielectric strength | 500 VAC 50/60 Hz for 1 minute between charged parts and the case |
| Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock resistance | 200m/s2 for 10 times each in X, Y, and Z directions |
| Degree of protection | IEC60529: IP67 |
| Applicable standard (EC Directive (Low Voltage Directive)) | EN60947-1 |
| EN60947-5-2 | |
| Applicable standard (EC Directive (EMC Directive)) | EMI: EN60947-5-2 |
| Emission Enclosure: CISPR11 Group 1 classA | |
| EMS: EN60947-5-2 | |
| Immunity ESD: IEC61000-4-2 | |
| Immunity RF-interference: IEC61000-4-3 | |
| Immunity Conducted Disturbance: IEC61000-4-6 | |
| Immunity Burst: IEC61000-4-4 | |
| CE marking: Equipped | |
| Applicable standard (CCC mark) | Not equipped |
| Connection method | Pre-wired models (Cable length: 5 m) |
| Weight (Packed state) | approx. 130 g |
| Material (case) | Heat-resistant ABS resin |
| Material (sensing surface) | Heat-resistant ABS resin |
| Accessories | Instruction manual |
Nelle seguenti circostanze, saremo spediti di nuovo gratis o il rimborso completo
Prodotto non utilizzabile durante il periodo di garanzia a causa di problemi di qualità del prodotto.
Il prodotto è danneggiato durante il trasporto.
Il prodotto non viene consegnato in tempo a causa di nostri motivi.
Il processo di spedire di nuovo o rimborso completo
I compratori inviano una email al nostro servizio clienti per descrivere il problema e fornire prove (foto chiare, screenshot o video).
Verificheremo il problema entro 1 giorno lavorativo. Per quelli che soddisfano i requisiti, verrà effettuata una sostituzione gratuita o un rimborso completo entro 1 giorno lavorativo.
Se è necessario un reso, la spedizione di reso sarà a nostro carico.
TL-Q5MC2-Z Miniature Proximity Sensor New in box
| Gross Weight | 0.13 |
|---|