! Live Chat FAQ


E2K-L26MC1 Proximity Switch NEW


E2K-L26MC1 OMRON Proximity Switch NEW

データシート E2K-L26MC1 Proximity Switch NEW

OMRON Proximity Switch E2K-L26MC1          

Product Description:

Mount to bypass pipes.

Fit a wide range of pipe diameters: 8 to 11 mm or 12 to 26 mm

Built-in Amplifiers to save space.





Applicable pipes





8 to 11 mm

12 to 26 mm


1 mm max.

1.5 mm max.

Detectable object

Liquid *

Repeat accuracy

±0.2 mm max.

Differential travel

0.6 to 5 mm

0.3 to 3 mm

(Reference value, varies with

pipe size and liquid.)

Power supply voltage

12 to 24 VDC (10.8 to 30 VDC), ripple (p-p): 10% max.

(operating voltage range)

Current consumption

12 mA max.

Control output

Load current

100 mA max.

Residual voltage

1 V max. (Load current: 100 mA, Cable length: 2 m)

Sensing liquid position

Indented mark position (For details, refer to Datasheet)


Detection indicator (orange)

Ambient temperature range

Operating: 0 to 55°C (with no icing or condensation), Storage: -10 to 65°C (with no icing or condensation)

Ambient humidity range

Operating/Storage: 25% to 85% (with no condensation)

Temperature influence

±4 mm of detection level at 23°C in the temperature range of 0 to 55°C

(with pure water or 20% saline solution)

(±6 mm for E2K-L13MC1 with pure water and a pipe diameter of 8 mm)

Voltage influence

±0.5 mm of detection level at the rated voltage in rated voltage ±10% range

Insulation resistance

50 MΩ min. (at 500 VDC) between current-carrying parts and case

Dielectric strength

500 VAC, 50/60 Hz for 1 min between current-carrying parts and case

Vibration resistance

Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance

Destruction: 500 m/s2 3 times each in X, Y, and Z directions

Degree of protection

IP66 (IEC)

Connection method

Pre-wired Models (Standard cable length: 2 m)

Weight (packed state)

Approx. 70 g


Case, Cover

Heat-resistant ABS

Cable clamp



Two bands, Four slip-proof tubes, Instruction manual

*Stable detection will not be possible in the following cases. Confirm detection capability with the Sensor installed before actual application.

1. If the specific inductive capacity or the specific electric conductivity of the liquid is too low, the liquid position may not be detected since this sensor is a capacitive sensor.

2. If the quantity of liquid is too low or the change in quantity is too low in comparison to the change in liquid level because the pipe is too thin or the walls of the pipe are too thick.

3. If there is a viscous film on the inner pipe wall, large quantities of foam or air bubbles, or excessive buildup of dirt on the inner pipe wall


In the following cases, we will make a free reissue or full refund

Product cannot use in warranty period because of product quality problems

Product is damaged in transit

Product is not delivered in time because of our reason

Process of free reissue or full refund

Buyers send an email to our customer service([email protected]) to describe the problem, and to provide evidence (clear photos, screenshots, or video)

We will check the problem in 1 working days. For those meet the requirements, free reissue or full refund will be made within 1 working days

If a return is required, the return shipping fee will be paid by us

Buyers can apply for return or exchange within 90 days of receipt

E2K-L26MC1 Proximity Switch NEW

Gross Weight 0.07
credit card