読み込み中...
供給について
本製品はメーカーへの取り寄せ品で、メーカーで新たに製造された製品をメーカー純正の梱包でお届けします。
納期の目安は通常20～40週間ですが、供給が不足している一部の型番では、さらに長くなる場合があります。
納期はメーカーの生産計画に左右されるため、正確な予測は困難です。当社では継続的に状況を確認し、納期の短縮に向けて最大限努めます。
LTC4007EGN#TRPBF Analog Devices Battery Charger ICs - 1 Reel (2500 pcs)
| データシート | LTC4007EGN#TRPBF Analog Devices Battery Charger ICs - 1 Reel (2500 pcs) |
| Manufacturer | Analog Devices |
| Model | LTC4007EGN#TRPBF |
| Category | Battery Charger ICs |
| Sales Unit | 1 Reel |
| Pack Qty (pcs) | 2500 |
| MOQ (pcs) | 2500 |
| Order Multiple (pcs) | 2500 |
| Device Package | 24-Lead SSOP (Narrow 0.15 Inch) |
| Packing Type | Reel |
| Operating temperature range | -40 to 85 °C |
| Package pin/lead count | 24 pins |
| Operating input voltage range | 6 to 28 V DCIN input TA=25 C external converter requires input headroom for programmed battery voltage |
| Battery charging configuration | 3 or 4 series Li-ion cells selectable 4.1 or 4.2 V per-cell float voltage 3C4C selects cell count CHEM selects 4.1/4.2 V per cell corresponding nominal pack float voltages are 12.3, 12.6, 16.4 or 16.8 V external MOSFET controller |
| Regulator switching frequency | 255 kHz (Min.) 300 kHz (Typ.) 345 kHz (Max.) TA=25 C VDCIN=20 V, VBAT=12 V normal quasi-constant-frequency operation, not dropout mode |
| High Conversion Efficiency | Up to 96% |
| Features | Output Currents Exceeding 4A Built-In Charge Termination for Li-Ion Batteries Thermistor Input for Temperature Qualified Charging Charging Current Monitor Output |
| Protection | AC Adapter Current Limiting Maximizes Charge Rate |
| Dropout Voltage | 0.5V Dropout Voltage Maximum Duty Cycle: 98% |
LTC4007EGN#TRPBF Analog Devices Battery Charger ICs - 1 Reel (2500 pcs)
| 総重量 | 1.643 |
|---|