loading...
E2EY-X4C1 OMRON Proximity Switch NEW
| Data Sheet | E2EY-X4C1 Proximity Switch NEW |
Product Description:
Non-ferrous metals, such as aluminum and brass, are detected.
Ferrous metals, such as iron and nickel, are not detected.
Aluminum foil, however, cannot be detected.
Specifications:
| Model | E2EY-X4C1 | E2EY-X8C1 | |
| Sensing distance | 4 mm ±10% | 8 mm ±10% | |
| Set distance | 0 to 2.8 mm | 0 to 5.6 mm | |
| Differential travel | 20% max. of sensing distance | ||
| Detectable object | Non-ferrous metal (Does not detect ferrous metal.) | ||
| Standard sensing object | Aluminum: 18 × 18 × 1 mm | Aluminum: 30 × 30 × 1 mm | |
| Response frequency * | 70 Hz | ||
| Power supply voltage | 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. | ||
| (operating voltage range) | |||
| Current consumption | 20 mA max. | ||
| Control | Load | NPN open-collector output, 100 mA max. (at 30 VDC) | |
| output | current | ||
|
| Residual | 2 V max. (Load current: 100 mA, Cable length: 2 m) | |
|
| voltage | ||
| Indicators | Detection indicator (red) | ||
| Operation mode | Load ON: NO (Refer to Datasheet.) | ||
| (with sensing object approaching) | |||
| Protection circuits | Reverse polarity protection, Load short-circuit protection, Surge suppressor | ||
| Ambient temperature range | Operating/Storage: -10 to 55°C (with no icing or condensation) | ||
| Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||
| Temperature influence | ±20% max. of sensing distance at 23°C in the temperature range of -10 to 55°C | ||
| Voltage influence | ±2.5% max. of sensing distance at rated voltage in rated voltage ±15% range | ||
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | ||
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||
| Shock resistance | Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions | ||
| Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant | ||
| Connection method | Pre-wired Models (Standard cable length: 2 m) | ||
| Weight (packed state) | Approx. 140 g | Approx. 190 g | |
| Materials | Case | Nickel-plated brass | |
| Sensing | Heat-resistant ABS | ||
| surface | |||
| Clamping | Nickel-plated brass | ||
| nuts | |||
| Toothed | Zinc-plated iron | ||
| washer | |||
The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance
In de volgende gevallen zullen wij een gratis omruiling of volledige terugbetaling uitvoeren:
Het product kan niet worden gebruikt tijdens de garantieperiode vanwege productkwaliteitsproblemen
Het product is beschadigd tijdens het transport
Het product wordt niet op tijd geleverd vanwege onze reden
Proces van gratis omruiling of volledige terugbetaling:
Kopers sturen een e-mail naar onze klantenservice om het probleem te beschrijven en bewijs te leveren (duidelijke foto's, schermafbeeldingen of video).
We zullen het probleem binnen 1 werkdag controleren. Voor in aanmerking komende gevallen bieden wij binnen 1-2 werkdagen een gratis vervanging of volledige terugbetaling aan.
Indien een retourzending vereist is, betalen wij de retour verzendkosten.
E2EY-X4C1 Proximity Switch NEW
| Gross Weight | 0.14 |
|---|