LTC3026EDD#TRPBF Analog Devices LDO Linear Regulators - 1 Reel (2500 pcs) Afbeelding ter illustratie

LTC3026EDD#TRPBF Analog Devices LDO Linear Regulators - 1 Reel (2500 pcs)

Prijs op aanvraag
    VISA VISA VISA Mastercard Mastercard Mastercard PayPal PayPal PayPal JCB JCB JCB American Express American Express American Express Diners Club Diners Club Diners Club DISCOVER DISCOVER DISCOVER
    Leveringsinformatie

    Dit product wordt bij de oorspronkelijke fabrikant besteld en geleverd als nieuw geproduceerd artikel in de originele fabrieksverpakking.

    De geschatte levertijd bedraagt doorgaans 20–40 weken; voor sommige schaarse onderdelen kan deze langer zijn.

    Levertijden hangen af van de productieplanning van de fabrikant en zijn moeilijk nauwkeurig te voorspellen. Wij volgen de voortgang regelmatig en doen ons best om de levering te vervroegen.

    LTC3026EDD#TRPBF Analog Devices LDO Linear Regulators - 1 Reel (2500 pcs)

    Datasheet LTC3026EDD#TRPBF Analog Devices LDO Linear Regulators - 1 Reel (2500 pcs)
    ManufacturerAnalog Devices
    ModelLTC3026EDD#TRPBF
    CategoryLDO Linear Regulators
    Sales Unit1 Reel
    Pack Qty (pcs)2500
    MOQ (pcs)2500
    Order Multiple (pcs)2500
    Device Package10-Lead DFN (3mm x 3mm w/ EP)
    Packing TypeReel
    Operating temperature range-40 to 125 °C
    Package pin/lead count10 pins
    Package nominal length3.0 mm
    Package nominal width3.0 mm
    Input operating voltage range, internal boost enabled1.14 to 3.5 V
    BOOST ENABLED, LSW = 10 µH
    VIN must also meet VOUT + dropout
    Full-temperature specification with E-grade assurance
    adequate thermal design required
    Input operating voltage range, external boost supply1.14 to 5.5 V
    BOOST DISABLED, SW = 0 V or floating, external VBST = 5 V (header)
    VIN must meet output/dropout requirement
    VBST must meet VOUT + 2.4 V
    Not applicable to internal boost-enabled mode
    Adjustable output programming range0.4 to 2.6 V
    Boost enabled or disabled
    adequate VIN dropout headroom and BST headroom required
    Full-temperature specification
    Continuous output current rating1.5 A
    VSHDN = VIN
    boost enabled or disabled
    VIN = 1.5 V, VOUT = 1.2 V, CIN = CBST = 1 µF, COUT = 10 µF ceramic
    Maximum junction temperature constrains simultaneous voltage/current combinations
    Features1.14V to 3.5V (with Boost Enabled)
    1.14V to 5.5V (with External 5V Boost)
    IIN < 1µA (Typ)
    IBST = 0.1µA (Typ)
    Low Dropout Voltage100mV at IOUT = 1.5A
    Adjustable Output Range0.4V to 2.6V
    Dropout VoltageExcellent Supply Rejection Even Near Dropout
    Operating ModesShutdown Disconnects Load from VIN and VBST
    Low Operating CurrentIIN = 950µA at VIN = 1.5V
    Shutdown CurrentLow Shutdown Current:
    ProtectionShort-Circuit, Reverse Current Protected
    Overtemperature Protected
    Laden...

    LTC3026EDD#TRPBF Analog Devices LDO Linear Regulators - 1 Reel (2500 pcs)

    Brutogewicht 1.643