LTC4060EFE#TRPBF Analog Devices Battery Charger ICs - 1 Reel (2500 pcs) Afbeelding ter illustratie

LTC4060EFE#TRPBF Analog Devices Battery Charger ICs - 1 Reel (2500 pcs)

Prijs op aanvraag
    VISA VISA VISA Mastercard Mastercard Mastercard PayPal PayPal PayPal JCB JCB JCB American Express American Express American Express Diners Club Diners Club Diners Club DISCOVER DISCOVER DISCOVER
    Leveringsinformatie

    Dit product wordt bij de oorspronkelijke fabrikant besteld en geleverd als nieuw geproduceerd artikel in de originele fabrieksverpakking.

    De geschatte levertijd bedraagt doorgaans 20–40 weken; voor sommige schaarse onderdelen kan deze langer zijn.

    Levertijden hangen af van de productieplanning van de fabrikant en zijn moeilijk nauwkeurig te voorspellen. Wij volgen de voortgang regelmatig en doen ons best om de levering te vervroegen.

    LTC4060EFE#TRPBF Analog Devices Battery Charger ICs - 1 Reel (2500 pcs)

    Datasheet LTC4060EFE#TRPBF Analog Devices Battery Charger ICs - 1 Reel (2500 pcs)
    ManufacturerAnalog Devices
    ModelLTC4060EFE#TRPBF
    CategoryBattery Charger ICs
    Sales Unit1 Reel
    Pack Qty (pcs)2500
    MOQ (pcs)2500
    Order Multiple (pcs)2500
    Device Package16-Lead TSSOP w/ EP
    Packing TypeReel
    Operating ambient temperature range-40 to 85 °C
    performance guaranteed from 0°C to 70°C ambient and 0°C to 85°C junction
    specifications over the -40°C to 85°C operating ambient range assured by design and characterization
    Separate maximum operating junction temperature is 125°C, not an ambient guarantee
    Package pin/lead count16 pins
    Operating input voltage range4.5 to 10 V
    VCC input
    required UVLO threshold depends on cell count
    full operating range with E-grade assurance
    Battery charging configuration1, 2, 3 or 4 series cells
    NiMH or NiCd
    Cell count and chemistry by control pins
    linear charging through external PNP transistor
    negative-delta-V termination with timer and overvoltage backup
    High fast-charge regulated emitter current1.9 A (Min.)
    2 A (Typ.)
    2.1 A (Max.)
    RPROG=698 ohm, 5 V < VCC < 10 V, VBAT=2.8 V
    full operating range with E-grade assurance
    current flows through internal sense resistor into external PNP emitter
    actual battery current slightly lower depending on transistor alpha
    FeaturesNo Firmware or Microcontroller Required
    No Sense Resistor or Blocking Diode Required
    Automatic Recharge Keeps Batteries Charged
    Automatic Detection of Battery
    Optional Temperature Qualified Charging
    Charge and AC Present Status Outputs Can Drive LED
    Programmable Fast Charge Current0.4A to 2A
    Accurate Charge Current±5% at 2A
    Output DischargePrecharge for Heavily Discharged Batteries
    Operating ModesAutomatic Sleep Mode with Input Supply Removal
    Manual Shutdown
    Negligible Battery Drain in Sleep Mode<1µA
    Laden...

    LTC4060EFE#TRPBF Analog Devices Battery Charger ICs - 1 Reel (2500 pcs)

    Brutogewicht 1.643