loading...
D4E-1A20N OMRON Travel Switch NEW
| Datablad | D4E-1A20N Travel Switch NEW |
OMRON Travel Switch D4E-1A20N
Product Description:
Flat springs with an improved lever ratio of the built-in switch ensure smooth snap action and long life expectancy.
Protection cover protects the built-in switch from dust and oil. Plunger incorporates a tough seal cap that lasts for a long time.
One touch connector eliminates need for tedious wiring operations and reduces downtime for wiring and maintenance (models with standard, easy-to-use screw terminals are also available).
Minute load model with gold cladding is optimal for electronic control.
Molded terminal types as well as molded terminal types with operating indicator lamps are available for screw terminal systems.
Approved by EN, UL, CSA, and CCC (Chinese standard). (Ask your OMRON representative for Information on approved models.)
No difference in mounting pitch and characteristics between D4E-[]N and D4E models.
Specifications:
| Degree of protection | IP67 | |
| Durability * | Mechanical | 10,000,000 operations min. |
| Electrical | 500,000 operations min. (5 A at 250 VAC, resistive load) | |
| 5,000,000 operations min. (10 mA at 24 VDC, resistive load) | ||
| Operating speed | 0.1 mm/sec to 0.5 m/sec | |
| Operating frequency | Mechanical: 120 operations/min | |
| Electrical: 30 operations/min | ||
| Rated frequency | 50/60 Hz | |
| Insulation resistance | 100 MΩ min. (at 500 VDC) | |
| Contact resistance | 15 mΩ max. (initial value for the built-in switch when tested alone) | |
| Dielectric strength | Between terminals of same polarity | 1,000 VAC, 50/60 Hz for 1 min |
| Between each terminal and non- | 1,500 VAC, 50/60 Hz for 1 min/Uimp at 2.5 kV (EN60947-5-1) | |
| current-carrying metal part | ||
| Rated insulation voltage (Ui) | 250V | |
| Pollution degree (operating environment) | 3 (EN60947-5-1) | |
| Short-circuit protective device (SCPD) | 10 A fuse (type gG or gI, IEC60269 approved) | |
| Conditional short-circuit current | 100 A (EN60947-5-1) | |
| Conventional enclosed thermal current (Ithe) | 5 A (EN60947-5-1) | |
| Protection against electric shock | Class II (grounding not required with double insulation) | |
| Vibration resistance | Malfunction | 10 to 55 Hz, 1.5-mm double amplitude |
| Shock resistance | Destruction | 1,000 m/s2 min. |
| Malfunction | 300 m/s2 min. | |
| Ambient operating temperature | -10°C to +80°C (with no icing) | |
| Ambient operating humidity | 35% to 95%RH | |
| Weight | Approx. 86 g (in case of roller plunger) | |
Note:
1.The above values are initial values.
2.The above ratings may vary depending on the model. Contact your OMRON representative for further details
I følgende tilfeller vil vi gi en gratis utskifting eller full refusjon:
Produktet kan ikke brukes i garantiperioden på grunn av kvalitetsproblemer med produktet
Produktet er skadet under frakt
Produktet blir ikke levert i tide på grunn av vår årsak
Prosessen med gratis utskifting eller full refusjon:
Kjøperne sender en e-post til vår kundeservice for å beskrive problemet og gi bevis (klare bilder, skjermbilder eller video)
Vi vil sjekke problemet innen 1 arbeidsdag. For kvalifiserte tilfeller vil vi gi en gratis utskifting eller full refusjon innen 1-2 virkedager
Hvis en retur er nødvendig, vil vi dekke returfraktkostnadene
D4E-1A20N Travel Switch NEW
| Bruttovekt | 0.3 |
|---|