loading...
MHL15-N2236 SICK Photoelectric switch NEW
| Datablad | MHL15-N2236 SICK Photoelectric switch NEW |
Product Description:
Polarizing filter for reliable detection of shiny surfaces
LED indicator: Switching output active and operation reserve
Optical axis axial
Mounting accessories
Specifications:
| Scanning range SR, typ. max./reflect. | 0.035 ... 5.0 m (PL 80 A) |
| Operating range | 0.035 ... 3.5 m (PL 80 A) |
| Light spot diameter | Approx. 80 mm at 3.5 m |
| Angle of dispersion sender | Approx. 1.5° |
| Optical axis | Axial |
| Light source 1), light type | LED, red light, with pol. filter, 650 nm |
| Light reception indicator | Yellow LED: lights continuously: |
| Reserve factor > 1.5 | |
| Blinks: reserve factor > 1.0 ... < 1.5 | |
| Supply voltage VS | 10 ... 30 V DC 2) |
| Residual ripple 3) | ≤ 5 VPP |
| Current consumption 4) | ≤ 30 mA |
| Switching outputs | Q: PNP |
| Q: NPN | |
| Signal voltage HIGH | VS – 2.9 V |
| VS | |
| Signal voltage LOW | Approx. 0 V |
| ≤ 2.9 V | |
| Switching mode | Light-switching |
| Dark-switching | |
| Output current IA max. | ≤ 100 mA |
| Response time 5) | ≤ 1.25 ms |
| Max. switching frequency 6) | 400/s |
| Connection type | plug M12, 3-pin |
| cable 7) | PUR, 2 m, 3 x 0.14 mm2, Ø 3.6 mm |
| VDE protection class 8) | 回 |
| Enclosure rating | IP 67 |
| Circuit protection 9) | A, B, C |
| Ambient temperature TA | Operation –25 °C ... +55 °C |
| Storage –25 °C ... +70 °C | |
| Gewicht | |
| with plug | Approx. 7 g |
| with cable 2 m | Approx. 90 g |
|
Housing material
| Housing: ABS |
| Optic: PMMA | |
2) Limit values
3) May not exceed or fall short of VS tolerances
4) Without load
5) Signal transit time with resistive load
6) With light/dark ratio 1:1
7) Do not bend below 0 °C
8) Reference voltage 50 V DC
9) A =VS connections reverse-polarity protected
B = Interference pulse suppression
C = Outputs overcurrent and shortcircuit protected
I følgende tilfeller vil vi gi en gratis utskifting eller full refusjon:
Produktet kan ikke brukes i garantiperioden på grunn av kvalitetsproblemer med produktet
Produktet er skadet under frakt
Produktet blir ikke levert i tide på grunn av vår årsak
Prosessen med gratis utskifting eller full refusjon:
Kjøperne sender en e-post til vår kundeservice for å beskrive problemet og gi bevis (klare bilder, skjermbilder eller video)
Vi vil sjekke problemet innen 1 arbeidsdag. For kvalifiserte tilfeller vil vi gi en gratis utskifting eller full refusjon innen 1-2 virkedager
Hvis en retur er nødvendig, vil vi dekke returfraktkostnadene
MHL15-N2236 SICK Photoelectric switch NEW
| Bruttovekt | 0.056 |
|---|