Leadshine 2-phase DSP Based Digital Stepper Drive DM Series DC18-40V 0.3-2.2A DM422C New
Datablad | Leadshine 2-phase DSP Based Digital Stepper |
Introductions:
Features:
*Anti-Resonance, provides optimum torque and nulls mid-range instability
*Multi-Stepping allows a low resolution step input to produce a higher microstep output for smooth system performance
*Microstep resolutions programmable, from full-step to 102,400 steps/rev
*Supply voltage up to +40 VDC
*Output current programmable, from 0.3A to 2.2A
*Pulse input frequency up to 75 KHz
*Automatic idle-current reduction
*Suitable for 2-phase and 4-phase motors
*Support PUL/DIR and CW/CCW modes
*Over-voltage, over-current, phase-error protections
Specifications:
Parameters | DM422C | |||
Min | Typical | Max | Unit | |
Output current | 0.3 | - | 2.2 (1.6 RMS) | A |
Supply voltage | +20 | - | +40 | VDC |
Logic signal current | 7 | 10 | 16 | mA |
Pulse input frequency | 0 | - | 75 | kHz |
Isolation resistance | 500 |
|
| MΩ |
Applications:
Other hot items of this Leadshine stepper drives for above applications:
DM422 | Leadshine 2-phase DSP Based Digital Stepper Drive EM Series DC18-40V 0.3-2.2A DM422 New |
DM556 | Leadshine 2-phase DSP Based Digital Stepper Drive EM Series DM556 DC18-50V 0.5-5.6A New |
DM870 | Leadshine 2-phase DSP Based Digital Stepper Drive EM Series DM870 DC18-80V 0.5-7.0A New |
DM805-AI | Leadshine 2-phase DSP Based Digital Stepper Drive EM Series DM805-AI DC18-80V 0.5-7.0A New |
DM1182 | Leadshine 2-phase DSP Based Digital Stepper Drive EM Series DM1182 AC80-150V 0.5-8.2A New |
DM2282 | Leadshine 2-phase DSP Based Digital Stepper Drive EM Series DM2282 AC80-220V 0.5-8.2A New |
3DM683 | Leadshine 3-phase DSP Based Digital Stepper Drive EM Series 3DM683 DC18-60V 0.5-8.3A New |
DM320C | Leadshine 2-phase DSP Based Digital Stepper Drive DM Series DC18-30V 0.3-2.0A DM320C New |
DM422C | Leadshine 2-phase DSP Based Digital Stepper Drive DM Series DC18-40V 0.3-2.2A DM422C New |
DM432C | Leadshine 2-phase DSP Based Digital Stepper Drive DM Series DC18-40V 0.5-3.2A DM432C New |
Produktet kan inte användas under garantiperioden på grund av produktkvalitetsproblem
Produkten är skadad under transport
Produkten levereras inte i tid på grund av vårt fel
Köpare skickar ett e-postmeddelande till vår kundtjänst för att beskriva problemet och tillhandahålla bevis (tydliga foton, skärmdumpar eller video)
Vi kommer att kontrollera problemet inom 1 arbetsdag. För berättigade fall kommer vi att tillhandahålla en gratis ersättning eller full återbetalning inom 1-2 arbetsdagar
Om en retur krävs, kommer vi att betala returfraktkostnaderna
Leadshine 2-phase DSP Based Digital Stepper Drive DM Series DC18-40V 0.3-2.2A DM422C New
Bruttovikt | 1 |
---|