WT250-P460 SICK Standard photoelectric switch NEW
Product Description:
Adjustable background suppression
• Adjustable sensing range
• Rugged plastic housing
• Visible red light for easy alignment
• Cable or M12 quick disconnect versions
• Easy mounting with included bracket
• M12 plug rotatable by 90°
Specifications:
Sensing range, adjustable :0.4...23.6 in (10...600 mm)1)
Background suppression: 0.8...21.7 in (20...550 mm)
Background suppression capability: % of set sensing distance (see previous page)
Sensitivity :Potentiometer, 2 turns, with position indicator
Light source2), light type: LED, red light
Light spot diameter :Approx. 1.4...19.7 in (35 mm at 500 mm)
Angle of divergence: Approx. 3°
Supply voltage VS: 10...30 V DC3)
Ripple4) :≤ 5 VSS
Current consumption5) :≤ 35 mA
Switching outputs: PNP, open collector: Q NPN, open collector: Q
Output current IA max:1 00 mA
Operation mode: Light/dark switching via control wire: + VS = light switching
0 V = dark switching
Response time6) :≤ 2 ms
Max. switching frequency7) :250 Hz
Connection types: Cable, PVC, 2 m8) 4 x 0.18 mm2, Ø 3.8 mm Plug, M12 4-pin
VDE protection class9):回
Circuit protection10) :A, B, C, D
Enclosure rating: IP 67/NEMA 6
Ambient temperature TA :Operation -13...131°F (-25. . .55°C)
Storage -40...158°F (-40. . .70°C)
Approximate weight :2.8 oz (80 g) 1.4 oz (40 g)
Housing material: Glass fiber reinforced ABS
1) 90% remission of material sensed (based on standard white according to
DIN 5033)
3) Limit value
4) May not exceed or fall short of VS tolerances
5) Without load
6) Signal transit time with resistive load
7) With dark/light ratio 1:1
8) Do not bend below 0°C
9) Reference voltage 50 V DC
10) A = VS connections reverse-polarity protected
B = Output Q short-circuit protected
C = Interference pulse suppression
D= Output overcurrent and short-circuit protected
11) Black = 6% remission Gray = 18% remission White = 90% remission
Produktet kan inte användas under garantiperioden på grund av produktkvalitetsproblem
Produkten är skadad under transport
Produkten levereras inte i tid på grund av vårt fel
Köpare skickar ett e-postmeddelande till vår kundtjänst för att beskriva problemet och tillhandahålla bevis (tydliga foton, skärmdumpar eller video)
Vi kommer att kontrollera problemet inom 1 arbetsdag. För berättigade fall kommer vi att tillhandahålla en gratis ersättning eller full återbetalning inom 1-2 arbetsdagar
Om en retur krävs, kommer vi att betala returfraktkostnaderna
WT250-P460 SICK Standard photoelectric switch NEW
Bruttovikt | 0.08 |
---|