TL-N7MD1 OMRON Proximity Switch NEW
Data Sheet | TL-N7MD1 Proximity Switch NEW |
OMRON Proximity Switch TL-N7MD1
Product Description:
Easy installation, high-speed pulse generator, high-speed rotation control, and more.
Direct mounted to metal (-N Models).
A wealth of models ideal for limit control, counting control, and other applications (-N Models).
Specifications:
Model | TL-Q5MD[] | TL-N7MD[] | TL-N12MD[] | TL-N20MD[] | |
Sensing distance | 5 mm ±10% | 7 mm ±10% | 12 mm ±10% | 20 mm ±10% | |
Set distance | 0 to 4 mm | 0 to 5.6 mm | 0 to 9.6 mm | 0 to 16 mm | |
Differential travel | 10% max. of sensing distance | ||||
Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on Data Sheet.) | ||||
Standard sensing object | Iron, 18 × 18 × 1 mm | Iron, 30 × 30 × 1 mm | Iron, 40 × 40 × 1 mm | Iron, 50 × 50 × 1 mm | |
Response frequency * | 500 Hz | 300 Hz | |||
Power supply voltage | 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. | ||||
(operating voltage range) | |||||
Leakage current | 0.8 mA max. | ||||
Control | Load current | 3 to 100 mA | |||
output | Residual | 3.3 V max. (Load current: 100 mA, Cable length: 2 m) | |||
| voltage | ||||
Indicators | D1 Models: Operation indicator (red), Setting indicator (green) | ||||
D2 Models: Operation indicator (red) | |||||
Operation mode (with | D1 Models: NO, D2 Models: NC | ||||
sensing object approaching) | Refer to the timing charts under I/O Circuit Diagrams on Data Sheet for details. | ||||
Protection circuits | Load short-circuit protection, Surge suppressor | ||||
Ambient temperature range | Operating/Storage: -25 to 70°C (with no icing or condensation) | ||||
Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||||
Temperature influence | ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C | ||||
Voltage influence | ±2.5% max. of sensing distance at rated voltage in the rated voltage ±15% range | ||||
Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||||
Dielectric strength | 1,000 VAC for 1 min between current-carrying parts and case | ||||
Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||||
Shock resistance | Destruction: 500 m/s2 | Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions | |||
3 times each in X, Y, | |||||
and Z directions | |||||
Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant | ||||
Connection method | Pre-wired Models (Standard cable length: 2 m) | ||||
Weight (packed state) | Approx. 45 g | Approx. 145 g | Approx. 170 g | Approx. 240 g | |
Materials | Case | Heat-resistant ABS | |||
Sensing | |||||
surface | |||||
Accessories | Instruction manual | Mounting Bracket, | Mounting Bracket, | Mounting Bracket, | |
Mounting phillips screws | Mounting phillips screws | Mounting phillips screws | |||
(M4 × 25), | (M4 × 30), | (M5 × 40), | |||
Instruction manual | Instruction manual | Instruction manual |
*The response frequency is an average value.
Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.
สินค้าไม่สามารถใช้งานได้ในระยะเวลารับประกันเนื่องจากปัญหาคุณภาพของสินค้า
สินค้าเสียหายขณะขนส่ง
สินค้าไม่ถึงเวลาที่กำหนดเนื่องจากเหตุผลที่เกิดจากเรา
ผู้ซื้อส่งอีเมลถึงฝ่ายบริการลูกค้าของเราเพื่ออธิบายปัญหาและให้หลักฐาน (ภาพถ่ายชัดเจนหรือภาพหน้าจอหรือวิดีโอ)
เราจะตรวจสอบปัญหาใน 1 วันทำการ สำหรับกรณีที่มีสิทธิ์รับเปลี่ยนสินค้าหรือคืนเงินเต็มจำนวนฟรี เราจะให้การเปลี่ยนสินค้าหรือคืนเงินเต็มจำนวนในเวลา 1-2 วันทำการ
หากต้องการคืนสินค้า ค่าส่งคืนจะถูกชำระโดยเรา
TL-N7MD1 Proximity Switch NEW
Gross Weight | 0.15 |
---|