Leadshine 2-phase DSP Based Digital Stepper Drive DM Series DC18-40V 0.3-2.2A DM422C New
Datenblatt | Leadshine 2-phase DSP Based Digital Stepper |
Introductions:
Features:
*Anti-Resonance, provides optimum torque and nulls mid-range instability
*Multi-Stepping allows a low resolution step input to produce a higher microstep output for smooth system performance
*Microstep resolutions programmable, from full-step to 102,400 steps/rev
*Supply voltage up to +40 VDC
*Output current programmable, from 0.3A to 2.2A
*Pulse input frequency up to 75 KHz
*Automatic idle-current reduction
*Suitable for 2-phase and 4-phase motors
*Support PUL/DIR and CW/CCW modes
*Over-voltage, over-current, phase-error protections
Specifications:
Parameters | DM422C | |||
Min | Typical | Max | Unit | |
Output current | 0.3 | - | 2.2 (1.6 RMS) | A |
Supply voltage | +20 | - | +40 | VDC |
Logic signal current | 7 | 10 | 16 | mA |
Pulse input frequency | 0 | - | 75 | kHz |
Isolation resistance | 500 |
|
| MΩ |
Applications:
Other hot items of this Leadshine stepper drives for above applications:
DM422 | Leadshine 2-phase DSP Based Digital Stepper Drive EM Series DC18-40V 0.3-2.2A DM422 New |
DM556 | Leadshine 2-phase DSP Based Digital Stepper Drive EM Series DM556 DC18-50V 0.5-5.6A New |
DM870 | Leadshine 2-phase DSP Based Digital Stepper Drive EM Series DM870 DC18-80V 0.5-7.0A New |
DM805-AI | Leadshine 2-phase DSP Based Digital Stepper Drive EM Series DM805-AI DC18-80V 0.5-7.0A New |
DM1182 | Leadshine 2-phase DSP Based Digital Stepper Drive EM Series DM1182 AC80-150V 0.5-8.2A New |
DM2282 | Leadshine 2-phase DSP Based Digital Stepper Drive EM Series DM2282 AC80-220V 0.5-8.2A New |
3DM683 | Leadshine 3-phase DSP Based Digital Stepper Drive EM Series 3DM683 DC18-60V 0.5-8.3A New |
DM320C | Leadshine 2-phase DSP Based Digital Stepper Drive DM Series DC18-30V 0.3-2.0A DM320C New |
DM422C | Leadshine 2-phase DSP Based Digital Stepper Drive DM Series DC18-40V 0.3-2.2A DM422C New |
DM432C | Leadshine 2-phase DSP Based Digital Stepper Drive DM Series DC18-40V 0.5-3.2A DM432C New |
Innerhalb von der Garantie aufgrund von Problemen mit der Produktqualität führt es dazu, dass das Produkt nicht verwendet werden kann
Die Ware wird während des Transports beschädigt
Das Produkt wurde aufgrund unseres Verschuldens nicht rechtzeitig geliefert.
Der Käufer sendet unserem Kundenservice eine E-Mail, um das Problem zu beschreiben und unterstützende Dokumente bereitzustellen (klares Foto, Screenshot oder Video)
Wir überprüfen das Problem innerhalb von 1-3 Werktagen. Wenn der Antrag gerechtet ist, wird innerhalb von 1-2 Tagen kostenloser Ersatz oder Rückerstattung arrangiert
Wenn eine Rücksendung erforderlich ist, wird die Rücksendegebühr von uns bezahlt
Leadshine 2-phase DSP Based Digital Stepper Drive DM Series DC18-40V 0.3-2.2A DM422C New
Gross Weight | 1 |
---|