LTM8045EY#PBF Analog Devices Switching Regulators & Controllers - 1 Tray (273 pcs) Abbildung ähnlich

LTM8045EY#PBF Analog Devices Switching Regulators & Controllers - 1 Tray (273 pcs)

Preis auf Anfrage
    VISA VISA VISA Mastercard Mastercard Mastercard PayPal PayPal PayPal JCB JCB JCB American Express American Express American Express Diners Club Diners Club Diners Club DISCOVER DISCOVER DISCOVER
    Lieferinformationen

    Dieses Produkt wird beim Originalhersteller bestellt und als neu gefertigte Ware in Originalverpackung geliefert.

    Die voraussichtliche Lieferzeit beträgt üblicherweise 20–40 Wochen; bei knappen Bauteilen kann sie länger sein.

    Die Lieferzeit hängt von der Produktionsplanung des Herstellers ab und lässt sich nur schwer genau abschätzen. Wir verfolgen den Fortschritt regelmäßig und bemühen uns um eine frühere Lieferung.

    LTM8045EY#PBF Analog Devices Switching Regulators & Controllers - 1 Tray (273 pcs)

    Datenblatt LTM8045EY#PBF Analog Devices Switching Regulators & Controllers - 1 Tray (273 pcs)
    ManufacturerAnalog Devices
    ModelLTM8045EY#PBF
    CategorySwitching Regulators & Controllers
    Sales Unit1 Tray
    Pack Qty (pcs)273
    MOQ (pcs)273
    Order Multiple (pcs)273
    Device Package40-Lead BGA (11.25mm x 6.25mm x 4.92mm)
    Packing TypeTray
    Internal operating temperature range-40 to 125 °C
    LTM8045E performance is guaranteed from 0°C to 125°C
    specifications over -40°C to 125°C internal temperature are assured by design and characterization
    Full-temperature limits apply only where specified
    Other limits use room-temperature test conditions
    Maximum ambient temperature depends on board layout, package thermal resistance and environmental factors
    the internal range is not an ambient rating
    Package pin/lead count40 pins
    Package nominal length11.25 mm
    Package nominal width6.25 mm
    Package nominal height4.92 mm
    Input DC voltage range2.8 to 18 V
    RUN = 12 V unless otherwise specified, TA = 25°C unless otherwise specified
    Continuous output DC current at ±2.5 V output0.7 A
    VIN = 12 V, VOUT = +2.5 V or -2.5 V
    positive and negative configurations require grounding the opposite output
    Not 0.7 A at every
    Continuous output DC current at ±15 V output0.375 A
    VIN = 12 V, VOUT = +15 V or -15 V
    operating-point and thermal restrictions
    FeaturesSEPIC or Inverting Topology
    User Configurable Undervoltage Lockout
    Output Voltage2.5V to 15V or –2.5V to –15V Output Voltage
    Selectable Switching Frequency200kHz to 2MHz
    Soft StartProgrammable Soft-Start
    Wird geladen...

    LTM8045EY#PBF Analog Devices Switching Regulators & Controllers - 1 Tray (273 pcs)

    Bruttogewicht 0.595