E2EY-X4C1 OMRON Proximity Switch NEW
Ficha de datos | E2EY-X4C1 Proximity Switch NEW |
Product Description:
Non-ferrous metals, such as aluminum and brass, are detected.
Ferrous metals, such as iron and nickel, are not detected.
Aluminum foil, however, cannot be detected.
Specifications:
Model | E2EY-X4C1 | E2EY-X8C1 | |
Sensing distance | 4 mm ±10% | 8 mm ±10% | |
Set distance | 0 to 2.8 mm | 0 to 5.6 mm | |
Differential travel | 20% max. of sensing distance | ||
Detectable object | Non-ferrous metal (Does not detect ferrous metal.) | ||
Standard sensing object | Aluminum: 18 × 18 × 1 mm | Aluminum: 30 × 30 × 1 mm | |
Response frequency * | 70 Hz | ||
Power supply voltage | 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. | ||
(operating voltage range) | |||
Current consumption | 20 mA max. | ||
Control | Load | NPN open-collector output, 100 mA max. (at 30 VDC) | |
output | current | ||
| Residual | 2 V max. (Load current: 100 mA, Cable length: 2 m) | |
| voltage | ||
Indicators | Detection indicator (red) | ||
Operation mode | Load ON: NO (Refer to Datasheet.) | ||
(with sensing object approaching) | |||
Protection circuits | Reverse polarity protection, Load short-circuit protection, Surge suppressor | ||
Ambient temperature range | Operating/Storage: -10 to 55°C (with no icing or condensation) | ||
Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||
Temperature influence | ±20% max. of sensing distance at 23°C in the temperature range of -10 to 55°C | ||
Voltage influence | ±2.5% max. of sensing distance at rated voltage in rated voltage ±15% range | ||
Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||
Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | ||
Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||
Shock resistance | Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions | ||
Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant | ||
Connection method | Pre-wired Models (Standard cable length: 2 m) | ||
Weight (packed state) | Approx. 140 g | Approx. 190 g | |
Materials | Case | Nickel-plated brass | |
Sensing | Heat-resistant ABS | ||
surface | |||
Clamping | Nickel-plated brass | ||
nuts | |||
Toothed | Zinc-plated iron | ||
washer |
The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance
El producto no se puede utilizar durante el período de garantía debido a problemas de calidad del producto.
El producto se dañó durante el transporte.
El producto no se entregó a tiempo debido a nuestra razón.
El comprador manda correo electronico a nuestro servicio al cliente para describir el problema y ofrece prueba documentos(foto clara, captura de pantalla o video)
Revisaremos problema en 1-3 dias laborables. ofreceremos reemplazo gratuito o reembolso completo en 1-2 dias laborables para la situacion que cumple los requisitos
Si se requiere una devolución, nosotros pagaremos la tarifa de envío de devolución
E2EY-X4C1 Proximity Switch NEW
Gross Weight | 0.14 |
---|