Este producto se pide al fabricante original y se suministra recién fabricado, con su embalaje original.
El plazo estimado habitual es de 20–40 semanas; algunos componentes con escasez de suministro pueden tardar más.
Los plazos dependen de la planificación de producción del fabricante y resultan difíciles de prever con precisión. Haremos un seguimiento continuo y todo lo posible para adelantar la entrega.
LT3650EDD-4.2#TRPBF Analog Devices Battery Charger ICs - 1 Reel (2500 pcs)
| Ficha técnica | LT3650EDD-4.2#TRPBF Analog Devices Battery Charger ICs - 1 Reel (2500 pcs) |
| Manufacturer | Analog Devices |
| Model | LT3650EDD-4.2#TRPBF |
| Category | Battery Charger ICs |
| Sales Unit | 1 Reel |
| Pack Qty (pcs) | 2500 |
| MOQ (pcs) | 2500 |
| Order Multiple (pcs) | 2500 |
| Device Package | 12-Lead DFN (3mm x 3mm w/ EP) |
| Packing Type | Reel |
| Operating temperature range | -40 to 85 °C |
| Package pin/lead count | 12 pins |
| Package nominal length | 3.0 mm |
| Package nominal width | 3.0 mm |
| Battery float voltage | 4.16 V (Min.) 4.2 V (Typ.) 4.24 V (Max.) full operating-temperature limits, E-grade assurance VIN = 20 V, BOOST-SW = 4 V, SHDN = 2 V, SENSE = BAT = float voltage, CTIMER = 0.68 uF |
| Operating input voltage range | 4.75 to 32 V 7.5 V required for startup operation below start threshold only if BOOST-SW > 2 V |
| Maximum programmable battery charge current | 2 A External current-sense resistor programs constant-current charging up to 2 A single-cell Li-ion/polymer, fixed 4.2 V variant not switch-current limit |
| Features | Programmable Charge Current Up to 2A No VIN Blocking Diode Required 1MHz Fixed Frequency Average Current Mode Control NTC Resistor Temperature Monitor Auto-Recharge at 97.5% Float Voltage Auto-Precondition at <70% Float Voltage Bad Battery Detection with Auto-Reset Binary Coded Open-Collector Status Pins |
| Protection | Programmable Input Current Limit |
LT3650EDD-4.2#TRPBF Analog Devices Battery Charger ICs - 1 Reel (2500 pcs)
| Peso bruto | 1.643 |
|---|