loading...
Xinje 2 Phase Stepper Drive DP-508 Up to 80VDC 5.0A 200Hz 200 Subdivision New
| Ficha de datos | Xinje 2 Phase Stepper Drive DP-508 Up to 80VDC |
Features:
Low motor running noise
Power supply up to 80VDC
Output current up to 5.0A
Dynamic selectable subdivision up to 200
Can drive any 4, 6, 8 lines two phases stepper motor below 5.0A
Optical isolation input, over current and over voltage protection
Specifications:
| Item | Minimum | Type | Maximum |
| Input Voltage(VDC) | 20 | 80 | 80 |
| Output Current(A) | 0 | - | 5 |
| Logic input current(mA) | 4 | 7 | 16 |
| Step Pulse Frequency(KHz) | 0 | - | 200 |
| Insulated Resistance(MΩ) | 500 | - | - |
| Ambient Temperature | 0 °C ~50 °C | ||
| Peak Temperature | 70 °C | ||
| Humidity | 40~90% RH(No condensing, dry bulb) | ||
| Resistance | 5.9m/s2 Max | ||
| Storage Temperature | -20 °C ~65 °C | ||
| External Dimensions | 138×85×38mm | ||
Current setting
Can set any current levels between 0~5.0A with single-turn potentiometer.
Product type
DP508: pulse signal connects to 24V; DP508-L: pulse signal connects to 5V.
Subdivision setting
| subdivision times | steps/round(1.8°/step) | SW2 | SW3 | SW4 | SW5 |
| 1 | 200 | OFF | OFF | OFF | OFF |
| 2 | 400 | OFF | OFF | OFF | ON |
| 4 | 800 | OFF | OFF | ON | OFF |
| 8 | 1600 | OFF | OFF | ON | ON |
| 16 | 3200 | OFF | ON | OFF | OFF |
| 32 | 6400 | OFF | ON | OFF | ON |
| 64 | 12800 | OFF | ON | ON | OFF |
| 128 | 25600 | OFF | ON | ON | ON |
| 5 | 1000 | ON | OFF | OFF | OFF |
| 10 | 2000 | ON | OFF | OFF | ON |
| 20 | 4000 | ON | OFF | ON | OFF |
| 25 | 5000 | ON | OFF | ON | ON |
| 40 | 8000 | ON | ON | OFF | OFF |
| 50 | 10000 | ON | ON | OFF | ON |
| 100 | 20000 | ON | ON | ON | OFF |
| 200 | 40000 | ON | ON | ON | ON |
Extension Reading
| Ficha de datos | Xinje 2 Phase Stepper Drive DP-508 Up to 80VDC |
Vamos a ofrecer un reemplazo gratuito o un reembolso completo con las siguientes situaciones
El producto no se puede utilizar durante el período de garantía debido a problemas de calidad del producto.
El producto se dañó durante el transporte.
El producto no se entregó a tiempo debido a nuestra razón.
El proceso de reemplazo gratuito o reembolso completo
El comprador manda correo electronico a nuestro servicio al cliente para describir el problema y ofrece prueba documentos(foto clara, captura de pantalla o video)
Revisaremos problema en 1-3 dias laborables. ofreceremos reemplazo gratuito o reembolso completo en 1-2 dias laborables para la situacion que cumple los requisitos
Si se requiere una devolución, nosotros pagaremos la tarifa de envío de devolución
Xinje 2 Phase Stepper Drive DP-508 Up to 80VDC 5.0A 200Hz 200 Subdivision New
| Gross Weight | 1 |
|---|