Leadshine Micro-size Brushed DC Servo Drive DCS303 DC18-30V Cont. 3A Peak 15A for 5-90W Brush DC Servo Motor New
Fiche technique | Leadshine Micro-size Brushed DC Servo Drive |
Introductions:
The DCS303 is a microsize brush DC servo drive. It is an ideal choice for those applications in which the mounting space for the driver is limited and higher output power is not necessary.
The DCS303 is very easy to tune and all parameters are visible. Handheld and PC based tuning tools, including ProTuner (Windows based setup software) and STU (Small servo tuning unit) can meet different tuning environments or requirements.
Features:
*Input Voltage: 18-30VDC
*Output Current: 3 A (Cont.), 15A(Peak), Power range: 5-90W.
*Based on DSP control technology and high smooth servo control algorithm.
*Handheld and PC based tuning tools, including Pro Tuner and STU
*Feedback resolution X4 encoder line count.
*Position Following error lock range adjustable
*Position error can be eliminated to 1 count, and velocity error can be eliminated to the Desired Velocity* ±0.3%
*Electronic gear ratio from 1/255 to 255
*Built-in motion controller for self-test with trapezoidal velocity profile
*Support PUL/DIR control signals
*Opto-isolated inputs, support single-ended signals
*10 latest errors self-record function
*Over-current, over-voltage, phase error, encoder error, position following error protections
*Small size, surface-mount technology
Specifications:
Parameters | Min | Typical | Max | Unit |
Peak output current | 0 | - | 15 | A |
Supply voltage | +18 | +24 | +30 | VDC |
Logic signal current | 7 | 10 | 15 | mA |
Pulse input frequency | 0 | - | 200 | kHz |
Isolation resistance | 500 |
|
| MΩ |
Current provided to encoder | - | - | 50 | mA |
Matching motors:
Drive number | DCS303 | DCS810 | DCS810S |
Motors | 18-30VDC brush DC servo motors with single-ended encoder, power up to 90W | 18-80VDC brush DC servo motors with differential encoder, power up to 400W | 18-80VDC brush DC servo motors with single-ended encoder, power up to 400W |
Applications:
Suitable for a wide range of equipments and instruments such as mini type engraving machines, inkjet printers, etc. It performs better in the applications require low noise, high velocity, high precision and high reliability
Other hot items of this Leadshine Brushed servo drives for above applications:
DCS303 | Leadshine Micro-size Brushed DC Servo Drive DCS303 DC18-30V Cont. 3A Peak 15A for 5-90W Brush DC Servo Motor New |
DCS810 | Leadshine Differential Brushed DC Servo Drive DCS810 DC18-80V Cont. 10A Peak 20A for 20-400W Brush DC Servo Motor New |
DCS810S | Leadshine Single-ended Brushed DC Servo Drive DCS810S DC18-80V Cont. 10A Peak 20A for 20-400W Brush DC Servo Motor New |
Le produit ne peut pas être utilisé normalement à cause de problèmes de qualité dans la période de garantie
Les marchandises sont endommagées pendant le transport
Si un retour est requis, les frais de retour seront payés par nous
L’acheteur enverra un courriel au personnel du service clientèle pour décrire les problèmes et fournir les documents d’attestation(les photos, les captures d’écran ou les vidéos claires)
Nous examinerons les problèmes dans un délai d’un à trois journées de travail. Pour ceux qui répondent aux exigences, nous fournirons un remplacement gratuit ou un remboursement dans un délai d’un à deux journées de travail
Si les marchandises doivent être retournées, nous payons les frais d'expédition de retour
Leadshine Micro-size Brushed DC Servo Drive DCS303 DC18-30V Cont. 3A Peak 15A for 5-90W Brush DC Servo Motor New
Gross Weight | 0.1 |
---|