VE18-4P3212 SICK Photoelectric switch NEW
Fiche technique | VE18-4P3212 SICK Photoelectric switch NEW |
Product Description:
Large range
Optionally VS/VE 18-3 in 3-line model or VS/VE with light/dark control line
Many other options
Specifications:
Housing | Straight |
Angled, 90° | |
Scanning range, max. typical | 0 ... 20 m |
Operating range | 0 ... 14 m |
Light spot diameter | Approx. 700 mm at a distance of 14 m |
Angle of dispersion of sender | 2.8° |
Sensitivity adjustable (optional) | Potentiometer 270° |
Light source1), light type | LED, infrared light |
Supply voltage VS | 10...30 V DC2) |
Ripple3) | ±10 % |
Current consumption4) | ≤ 30 mA |
Switching outputs (optional) | PNP/NPN; open collector: Q |
Switching mode | Q, dark-switching |
| Q, light-switching |
via control wire L/D5) | Q, light-/dark-switching |
| +VS=light-switching |
| 0 V = dark-switching |
Output current IA max. | 100 mA |
Response time6) | ≤ 2 ms |
Max. switching frequency7) | 250/s |
Test input “TE”, VS sender off | PNP, NPN: TE to 0 V |
Connection types | |
Cable 2 m8) | |
| sender VS 18-OD...: PVC, 3 x 0.14 mm2 , l3.1 mm |
| receiver VE 18. . .: PVC, 3 x 0.14 mm2 , l3.1 mm |
| PVC, 4 x 0.14 mm2 , l5mm |
Plug | sender VS 18-OD...: 4 pin, M12 |
receiver VE 18. . .: 4 pin, M12 | |
VDE protection class9) | 回 |
Circuit protection10) | A, B, C, D |
Enclosure rating | IP 67 |
Ambient temperature TA | – 25 °C...+ 70 °C |
Weight |
|
metal housing | Sender and receiver each approx. 120 g |
plastic housing | Sender and receiver each approx. 100 g |
Housing material | |
metal housing | Nickel-plated brass; PBT/PC |
plastic housing | PBT/PC |
optic | PMMA |
2) Limit values
3) Must be within VS tolerances
4) Without load
5) Control wire open: NPN: light-switching PNP: dark-switching
6) With resistive load
7) With light/dark ratio 1:1
8) Do not bend below 0 °C
9) Reference voltage 50 V DC
10) A = Connections reverse-polarity protected
B = Inputs/outputs reverse-polarity protected
C = Interference suppression
D= Outputs overcurrent and shortcircuit protected
Le produit ne peut pas être utilisé normalement à cause de problèmes de qualité dans la période de garantie
Les marchandises sont endommagées pendant le transport
Si un retour est requis, les frais de retour seront payés par nous
L’acheteur enverra un courriel au personnel du service clientèle pour décrire les problèmes et fournir les documents d’attestation(les photos, les captures d’écran ou les vidéos claires)
Nous examinerons les problèmes dans un délai d’un à trois journées de travail. Pour ceux qui répondent aux exigences, nous fournirons un remplacement gratuit ou un remboursement dans un délai d’un à deux journées de travail
Si les marchandises doivent être retournées, nous payons les frais d'expédition de retour
VE18-4P3212 SICK Photoelectric switch NEW
Gross Weight | 0.12 |
---|