E2K-F10MC1 Omron Flat Proximity Sensor NEW
Adatlap | E2K-F10MC1 Flat Proximity Sensor NEW |
Product Description:
DC 3-Wire Model , Flat Type , Unshielded , Sensing Distance 10mm , Operation Mode NO.
Specifications:
Type | Unshielded |
Sensing method | Capacitive type |
Sensing distance | 10 mm -10% to +10% |
Setting distance | 0 to 7.5 mm |
Differential distance | 15% Max. of sensing distance |
Sensing object | Conductor and dielectrics |
Standard sensing object | With grounded metal 50*50*1mm |
Response frequency | DC: 100 Hz (average) |
Power supply voltage | 12 to 24 VDC (ripple(p-p) :10% Max.) |
Operating voltage range | 10 to 30 VDC |
Current consumption | 10 mA Max. (at 24VDC) |
Control output (Output type) | NPN open collector output |
Control output (Switching capacity) | 0 to 100 mA (at 30VDC) |
Control output (Residual voltage) | (DC) 1.5 V Max. (under load current with cable length of 2m) |
Indicator | Detection indicator(red) |
Operation mode | NO |
Protective circuit | Surge suppressor |
Power supply reverse polarity protection | |
Standard or Different frequency | Standard |
Ambient temperature | Operating: -10 to 55 CEL |
Storage: -10 to 55 CEL | |
(with no icing or condensation) | |
Ambient humidity | Operating: 35 to 95 %RH |
Storage: 35 to 95 %RH | |
(with no condensation) | |
Temperature influence | +-15% Max. of sensing distance in temperature range of -10 to +55CEL |
(As the basis for sensing distance of 23CEL) | |
Voltage influence | +-2.5% Max. of sensing distance in rated voltage range +-10%. (As the basis for sensing distance at standard power voltage) |
Insulation resistance | 50 M OHM Min. at 500VDC between charged parts and the case |
Dielectric strength | 500 VAC 50/60 Hz for 1 minute between charged parts and the case |
Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
Shock resistance | 500m/s2 for 3 times each in X, Y, and Z directions |
Degree of protection | IEC60529: IP66 |
Applicable standard (EC Directive (Low Voltage Directive)) | EN60947-1 |
EN60947-5-2 | |
Applicable standard (EC Directive (EMC Directive)) | EMI: EN60947-5-2 |
Emission Enclosure: CISPR11 Group 1 class A | |
EMS: EN60947-5-2 | |
Immunity ESD: IEC61000-4-2 | |
Immunity RF-interference: IEC61000-4-3 | |
Immunity Conducted Disturbance: IEC61000-4-6 | |
Immunity Burst: IEC61000-4-4 | |
CE marking: Equipped | |
Applicable standard (CCC mark) | Not equipped |
Connection method | Pre-wired models (Cable length: 2 m) |
Weight (Packed state) | approx. 35 g |
Material (case) | Heat-resistant ABS resin |
Material (sensing surface) | Heat-resistant ABS resin |
Accessories | Instruction manual |
A termék nem használható a garanciális időszakban a termék minőségi problémái miatt
A termék szállítás közben megsérült
A termék nem érkezett meg időben azért, mert mi vagyunk az ok
A vásárlók e-mailt küldenek ügyfélszolgálatunkra, hogy leírják a problémát, és bizonyítékokat nyújtsanak (tisztán látható fényképek, képernyőképek vagy videók)
Ellenőrizzük a problémát 1 munkanapon belül. A jogos esetekben 1-2 munkanapon belül ingyenes csere vagy teljes visszatérítés biztosítunk
Ha visszaküldés szükséges, a visszaküldési díjat mi fizetjük
E2K-F10MC1 Flat Proximity Sensor NEW
Gross Weight | 0.035 |
---|