Leadshine 2-phase Classic Analog Stepper Drive M760 DC20-75V 1.45-6.0A New
Data Sheet | Leadshine 2-phase Classic Analog Stepper Drive |
Introductions:
The M760 is a high performance microstepping drive based on pure-sinusoidal current control technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drives on the markets. It is suitable for driving 2-phase and 4-phase hybrid stepper motors.
Features:
*Extremely cost-effective
*Good high speed performance
*Supply voltage up to +68 VDC
*Output current up to 6.0A
*Self-adjustment technology
*Pure-sinusoidal current control technology
*Pulse input frequency up to 300 KHz
*Automatic idle-current reduction
*16 selectable resolutions in decimal and binary, up to 51,200 steps/rev
*Support PUL/DIR and CW/CCW modes
*Short-voltage, over-voltage, over-current protections
Specifications:
Parameters | M760 | |||
Min | Typical | Max | Unit | |
Output current | 1.0 | - | 6.0 (4.29 RMS) | A |
Supply voltage | +20 | +48 | +68 | VDC |
Logic signal current | 7 | 10 | 16 | mA |
Pulse input frequency | 0 | - | 300 | kHz |
Isolation resistance | 500 |
|
| MΩ |
Applications:
Other hot items of this Leadshine stepper drives for above applications:
M542 | Leadshine 2-phase Classic Analog Stepper Drive M542 DC20-50V 1.0-4.2A New |
M550 | Leadshine 2-phase Classic Analog Stepper Drive M550 DC20-50V 1.2-5.0A New |
M752 | Leadshine 2-phase Classic Analog Stepper Drive M752 DC20-75V 1.8-5.2A New |
M760 | Leadshine 2-phase Classic Analog Stepper Drive M760 DC20-75V 1.45-6.0A New |
M860 | Leadshine 2-phase Classic Analog Stepper Drive M860 DC24-80V 2.4-7.2A New |
M880A | Leadshine 2-phase Classic Analog Stepper Drive M880A DC24-80V 2.8-7.8A New |
MA860H | Leadshine 2-phase Classic Analog Stepper Drive MA860H DC24-80V 2.4-7.2A New |
Ürün garanti süresinde ürün kalite sorunları nedeniyle kullanılamıyor
Ürün taşıma sırasında hasar görmüş
Ürün, nedenimizden dolayı zamanında teslim edilmedi
Alıcılar sorunu açıklamak ve kanıt sağlamak için müşteri hizmetlerimize e-posta gönderirler (net fotoğraflar, ekran görüntüleri veya video)
Sorunu 1 iş günü içinde kontrol edeceğiz. Hak sahibi durumlarda, 1-2 iş günü içinde ücretsiz değiştirme veya tam iade sağlayacağız
Bir iade gerekli ise, iade kargo ücretini biz ödeyeceğiz
Leadshine 2-phase Classic Analog Stepper Drive M760 DC20-75V 1.45-6.0A New
Gross Weight | 0.57 |
---|