LTC3026EDD#TRPBF Analog Devices LDO Linear Regulators - 1 Reel (2500 pcs) Kép csak illusztráció

LTC3026EDD#TRPBF Analog Devices LDO Linear Regulators - 1 Reel (2500 pcs)

Ár kérésre
    VISA VISA VISA Mastercard Mastercard Mastercard PayPal PayPal PayPal JCB JCB JCB American Express American Express American Express Diners Club Diners Club Diners Club DISCOVER DISCOVER DISCOVER
    Szállítási információk

    Ezt a terméket az eredeti gyártótól rendeljük meg, és újonnan gyártva, a gyártó eredeti csomagolásában szállítjuk.

    A becsült szállítási idő általában 20–40 hét; egyes hiánycikknek számító alkatrészek esetében hosszabb is lehet.

    A szállítási idő a gyártó termelési ütemtervétől függ, és nehéz pontosan előre jelezni. Folyamatosan nyomon követjük az előrehaladást, és mindent megteszünk a korábbi szállítás érdekében.

    LTC3026EDD#TRPBF Analog Devices LDO Linear Regulators - 1 Reel (2500 pcs)

    Adatlap LTC3026EDD#TRPBF Analog Devices LDO Linear Regulators - 1 Reel (2500 pcs)
    ManufacturerAnalog Devices
    ModelLTC3026EDD#TRPBF
    CategoryLDO Linear Regulators
    Sales Unit1 Reel
    Pack Qty (pcs)2500
    MOQ (pcs)2500
    Order Multiple (pcs)2500
    Device Package10-Lead DFN (3mm x 3mm w/ EP)
    Packing TypeReel
    Operating temperature range-40 to 125 °C
    Package pin/lead count10 pins
    Package nominal length3.0 mm
    Package nominal width3.0 mm
    Input operating voltage range, internal boost enabled1.14 to 3.5 V
    BOOST ENABLED, LSW = 10 µH
    VIN must also meet VOUT + dropout
    Full-temperature specification with E-grade assurance
    adequate thermal design required
    Input operating voltage range, external boost supply1.14 to 5.5 V
    BOOST DISABLED, SW = 0 V or floating, external VBST = 5 V (header)
    VIN must meet output/dropout requirement
    VBST must meet VOUT + 2.4 V
    Not applicable to internal boost-enabled mode
    Adjustable output programming range0.4 to 2.6 V
    Boost enabled or disabled
    adequate VIN dropout headroom and BST headroom required
    Full-temperature specification
    Continuous output current rating1.5 A
    VSHDN = VIN
    boost enabled or disabled
    VIN = 1.5 V, VOUT = 1.2 V, CIN = CBST = 1 µF, COUT = 10 µF ceramic
    Maximum junction temperature constrains simultaneous voltage/current combinations
    Features1.14V to 3.5V (with Boost Enabled)
    1.14V to 5.5V (with External 5V Boost)
    IIN < 1µA (Typ)
    IBST = 0.1µA (Typ)
    Low Dropout Voltage100mV at IOUT = 1.5A
    Adjustable Output Range0.4V to 2.6V
    Dropout VoltageExcellent Supply Rejection Even Near Dropout
    Operating ModesShutdown Disconnects Load from VIN and VBST
    Low Operating CurrentIIN = 950µA at VIN = 1.5V
    Shutdown CurrentLow Shutdown Current:
    ProtectionShort-Circuit, Reverse Current Protected
    Overtemperature Protected
    Betöltés...

    LTC3026EDD#TRPBF Analog Devices LDO Linear Regulators - 1 Reel (2500 pcs)

    Bruttó tömeg 1.643