E3S-LS3N Omron PCB Sensors NEW
Arkusz danych | E3S-LS3N PCB Sensors NEW |
Product Description:
Limited Reflective Type Pre-Wired Type , Sensing Distance 20 to 35mm , Red LED Light.
Specifications:
Sensing method | Limited Reflective |
Sensing distance | 20 mm to 35 mm (White paper 80*80mm) |
Light source | Red LED (660nm) |
Power supply voltage | 12 to 24 VDC -10% to 10% (ripple(p-p) :10% Max.) |
Current consumption | 25mA DC Max. |
Control output (Output type) | NPN open collector output |
Control output (Load current) | 0 to 100 mA |
Control output (Residual voltage) | (DC) 1 V Max. (Load current 100mA Max.) |
Operation mode | Light-ON |
Load power supply voltage | 24 VDC Max. |
Protective circuit | Surge suppressor |
Output short-cut protection | |
Power supply reverse polarity protection | |
Mutual interference prevention | |
Response time | 1 ms Max. |
Ambient illuminance | Incandescent lamp:5000 lux Max. |
Ambient temperature | Operating: -10 to 55 CEL |
Storage: -25 to 70 CEL | |
(with no icing or condensation) | |
Ambient humidity | Operating: 35 to 85 %RH |
Storage: 35 to 95 %RH | |
(with no condensation) | |
Insulation resistance | 20 M OHM Min. at 500 VDC between charged parts and the case |
Dielectric strength | 1000 VAC at 50/60 Hz for 1 minute between charged parts and the case |
Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
Shock resistance | 500m/s2 for 3 times each in X, Y, and Z directions |
Degree of protection | IEC60529: IP40 |
Applicable standard (EC Directive (Low Voltage Directive)) | EN60947-5-2 |
Applicable standard (EC Directive (EMC Directive)) | EMI: EN60947-5-2 |
Emission Enclosure: EN55011 Group 1 class A | |
EMS: EN60947-5-2 | |
Immunity ESD: IEC61000-4-2 | |
Immunity RF-interference: IEC61000-4-3 | |
Immunity Burst: IEC61000-4-4 | |
CE marking: Equipped | |
Connection method | Pre-wired models (Cable length: 2 m) |
Indicator | Operation indicator(orange) |
Weight (packed state) | approx. 80 g |
Tightening torque | 0.54 N.m Max. (with M3 screw) |
Material (case) | ABS |
Material (lens) | Methacrylate resin |
Accessories | Instruction manual, M3 screw |
Produkt nie może być używany w okresie gwarancyjnym z powodu problemów z jakością produktu
Produkt uległ uszkodzeniu w transporcie
Produkt nie został dostarczony na czas z powodu naszej winy
Kupujący wysyłają e-mail do naszej obsługi klienta, opisując problem i dostarczając dowody (jasne zdjęcia, zrzuty ekranu lub wideo)
Sprawdzimy problem w ciągu 1 dnia roboczego. W przypadku kwalifikujących się przypadków, zapewniamy darmową wymianę lub pełny zwrot w ciągu 1-2 dni roboczych
Jeśli wymagany jest zwrot, koszt zwrotu zostanie przez nas pokryty.
E3S-LS3N PCB Sensors NEW
Gross Weight | 0.08 |
---|