A carregar...
Informações de fornecimento
Este produto é encomendado ao fabricante original e fornecido recém-fabricado, na embalagem original do fabricante.
O prazo estimado habitual é de 20–40 semanas; alguns componentes com escassez de fornecimento podem demorar mais.
Os prazos dependem do planeamento de produção do fabricante e são difíceis de prever com precisão. Acompanharemos regularmente o processo e faremos todos os esforços para antecipar a entrega.
LT3042EDD#TRPBF Analog Devices LDO Linear Regulators - 1 Reel (2500 pcs)
| Ficha técnica | LT3042EDD#TRPBF Analog Devices LDO Linear Regulators - 1 Reel (2500 pcs) |
| Manufacturer | Analog Devices |
| Model | LT3042EDD#TRPBF |
| Category | LDO Linear Regulators |
| Sales Unit | 1 Reel |
| Pack Qty (pcs) | 2500 |
| MOQ (pcs) | 2500 |
| Order Multiple (pcs) | 2500 |
| Device Package | 10-Lead DFN (3mm x 3mm w/ EP) |
| Packing Type | Reel |
| Operating temperature range | -40 to 125 °C |
| Package pin/lead count | 10 pins |
| Package nominal length | 3.0 mm |
| Package nominal width | 3.0 mm |
| Adjustable output voltage range | 0 to 15 V Programmed by external SET resistor VIN must supply required dropout headroom VOUT below 1 V requires at least 10 µA load for stability thermal/current-limit limits |
| Minimum input voltage turn-on threshold | 1.78 V (Typ.) 2 V (Max.) ILOAD = 200 mA, VIN UVLO rising EN/UV threshold must also be met Maximum over the full operating temperature range E-grade assurance |
| Nominal output current capability | 200 mA Adequate VIN headroom, thermal design, and ILIM setting required Internal current-limit foldback starts for VIN−VOUT > 12 V not 200 mA at every input/output combination |
| Dropout voltage at 200 mA | 350 mV (Typ.) TA = 25°C, ILOAD = 200 mA, measured at 1% regulation loss Typical only excludes guaranteed high-current maximum due to production test limitations Minimum VIN dominates for low output voltages |
| Ultralow RMS Noise | 0.8μVRMS (10Hz to 100kHz) |
| Ultralow Spot Noise | 2nV/√Hz at 10kHz |
| Ultrahigh PSRR | 79dB at 1MHz |
| Wide Input Voltage Range | 1.8V to 20V |
| Capacitor Requirements | Single Capacitor Improves Noise and PSRR |
| High Bandwidth | 1MHz |
| Protection | Programmable Current Limit Internal Current Limit with Foldback Reverse Battery and Reverse Current Protection |
| Power-Good Output | Programmable Power Good |
| Features | Fast Start-Up Capability |
| Output Noise | Parallelable for Lower Noise and Higher Current |
LT3042EDD#TRPBF Analog Devices LDO Linear Regulators - 1 Reel (2500 pcs)
| Peso Bruto | 1.643 |
|---|