A carregar...
Informações de fornecimento
Este produto é encomendado ao fabricante original e fornecido recém-fabricado, na embalagem original do fabricante.
O prazo estimado habitual é de 20–40 semanas; alguns componentes com escassez de fornecimento podem demorar mais.
Os prazos dependem do planeamento de produção do fabricante e são difíceis de prever com precisão. Acompanharemos regularmente o processo e faremos todos os esforços para antecipar a entrega.
LT3045IDD#TRPBF Analog Devices LDO Linear Regulators - 1 Reel (2500 pcs)
| Ficha técnica | LT3045IDD#TRPBF Analog Devices LDO Linear Regulators - 1 Reel (2500 pcs) |
| Manufacturer | Analog Devices |
| Model | LT3045IDD#TRPBF |
| Category | LDO Linear Regulators |
| Sales Unit | 1 Reel |
| Pack Qty (pcs) | 2500 |
| MOQ (pcs) | 2500 |
| Order Multiple (pcs) | 2500 |
| Device Package | 10-Lead DFN (3mm x 3mm w/ EP) |
| Packing Type | Reel |
| Operating temperature range | -40 to 125 °C |
| Package pin/lead count | 10 pins |
| Package nominal length | 3.0 mm |
| Package nominal width | 3.0 mm |
| Input voltage range | 2 to 20 V EN/UV threshold must be met I-grade guaranteed over −40°C to 125°C VIN must provide required output headroom current-limit foldback/thermal constraints |
| Adjustable output voltage range | 0 to 15 V VIN > VOUT, with adequate dropout headroom external RSET programs output For VOUT < 1 V, at least 10 µA load is required for stability Current-limit and thermal constraints |
| Nominal output current capability | 500 mA Requires adequate headroom/thermal design and suitable ILIM setting Internal current-limit foldback starts for VIN−VOUT > 12 V not a 500 mA guarantee throughout the input/output range |
| Dropout voltage at 500 mA | 260 mV (Typ.) ILOAD = 500 mA, TA = 25°C measured at 1% output regulation loss For VOUT < 1.5 V minimum VIN may dominate DFN: typical only expressly excludes guaranteed high-current maximum dropout in this package |
| Ultralow RMS Noise | 0.8µVRMS (10Hz to 100kHz) |
| Ultralow Spot Noise | 2nV/√Hz at 10kHz |
| Ultrahigh PSRR | 76dB at 1MHz |
| Capacitor Requirements | Single Capacitor Improves Noise and PSRR |
| High Bandwidth | 1MHz |
| Protection | Programmable Current Limit |
| Power-Good Output | Programmable Power Good |
| Features | Fast Start-Up Capability |
| Output Noise | Parallelable for Lower Noise and Higher Current |
LT3045IDD#TRPBF Analog Devices LDO Linear Regulators - 1 Reel (2500 pcs)
| Peso Bruto | 1.643 |
|---|