F&C Photoelectric switch BGS series BGS-30 backgroud suppression distance setting adjustable normally open normally closed funtion series 4-wires
Datenblatt | F&C Photoelectric switch BGS series BGS-30 |
Features:
Visible infrared high power LED;
Operation of high intensity light;
By A.P.R circuit (automatic power increase);
Industry-leading quality;
Original IC module, high-tech products, strong anti-interference ability of the environment.
Specifications:
Sensing type
Model | Reflective | |||
BGS-10 | BGS-10-N/D | BGS-10D | BGS-30-N/D | |
BGS-10P | BGS-10-P/D | BGS-10PD | BGS-30-P/D | |
Ø1mm | Ø1.5mm | Ø1mm | Ø1.5mm | |
Scanning distance | 100mm | 300mm | 100mm | 300mm |
Light source | Red LED: 630nm | |||
Operating voltage | DC: 12~24VDC±10%, pulse maximum of 10% P-P | |||
Current consumption | Maximum 30mA | |||
Load current | 100mA Max at DC 30V | |||
Output type | N=NPN.NO.NC P=PNP.NO.NC | |||
Protection circuit | Reversed supply circuit protection, short circuit protection output | |||
Response time | 0.5ms Max | |||
In sulation resistance | 20MΩmin (DC500V) | |||
Dielectric strength | AC1000V 60Hz for 60 Sec | |||
Operating temperature | -20℃~+45℃ (with no icing or condensation) | |||
Ambient humidity | 35%~85% (Relative humidity) | |||
Storage temperature | -10℃~+55℃ (with no icing or condensation) | |||
Storage humidity | 35%~95% (Relative humidity) | |||
Protection degree | IP67 | |||
Material | Glass fiber reinforced resin | |||
Wiring method | Φ4×2M/3-wires / Φ4×2M/2-wires | |||
Ambient light | Incandescent light: 5000lux, sunlight: 20000lux | |||
Weight | Approx. 20g |
Applications:
*No change with point of view background or dust.
*Detection of line items.
*Detect small objects, the minimum detection material is 1mm.
*The most suitable logistics unit.
Innerhalb von der Garantie aufgrund von Problemen mit der Produktqualität führt es dazu, dass das Produkt nicht verwendet werden kann
Die Ware wird während des Transports beschädigt
Das Produkt wurde aufgrund unseres Verschuldens nicht rechtzeitig geliefert.
Der Käufer sendet unserem Kundenservice eine E-Mail, um das Problem zu beschreiben und unterstützende Dokumente bereitzustellen (klares Foto, Screenshot oder Video)
Wir überprüfen das Problem innerhalb von 1-3 Werktagen. Wenn der Antrag gerechtet ist, wird innerhalb von 1-2 Tagen kostenloser Ersatz oder Rückerstattung arrangiert
Wenn eine Rücksendung erforderlich ist, wird die Rücksendegebühr von uns bezahlt
F&C Photoelectric switch BGS series BGS-30 backgroud suppression distance setting adjustable normally open normally closed funtion series 4-wires
Gross Weight | 0.05 |
---|