E2EY-X8C1 OMRON Proximity Switch NEW
Data Sheet | E2EY-X8C1 Proximity Switch NEW |
Product Description:
Non-ferrous metals, such as aluminum and brass, are detected.
Ferrous metals, such as iron and nickel, are not detected.
Aluminum foil, however, cannot be detected.
Specifications:
Model | E2EY-X4C1 | E2EY-X8C1 | |
Sensing distance | 4 mm ±10% | 8 mm ±10% | |
Set distance | 0 to 2.8 mm | 0 to 5.6 mm | |
Differential travel | 20% max. of sensing distance | ||
Detectable object | Non-ferrous metal (Does not detect ferrous metal.) | ||
Standard sensing object | Aluminum: 18 × 18 × 1 mm | Aluminum: 30 × 30 × 1 mm | |
Response frequency * | 70 Hz | ||
Power supply voltage | 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. | ||
(operating voltage range) | |||
Current consumption | 20 mA max. | ||
Control | Load | NPN open-collector output, 100 mA max. (at 30 VDC) | |
output | current | ||
| Residual | 2 V max. (Load current: 100 mA, Cable length: 2 m) | |
| voltage | ||
Indicators | Detection indicator (red) | ||
Operation mode | Load ON: NO (Refer to Datasheet.) | ||
(with sensing object approaching) | |||
Protection circuits | Reverse polarity protection, Load short-circuit protection, Surge suppressor | ||
Ambient temperature range | Operating/Storage: -10 to 55°C (with no icing or condensation) | ||
Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||
Temperature influence | ±20% max. of sensing distance at 23°C in the temperature range of -10 to 55°C | ||
Voltage influence | ±2.5% max. of sensing distance at rated voltage in rated voltage ±15% range | ||
Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||
Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | ||
Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||
Shock resistance | Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions | ||
Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant | ||
Connection method | Pre-wired Models (Standard cable length: 2 m) | ||
Weight (packed state) | Approx. 140 g | Approx. 190 g | |
Materials | Case | Nickel-plated brass | |
Sensing | Heat-resistant ABS | ||
surface | |||
Clamping | Nickel-plated brass | ||
nuts | |||
Toothed | Zinc-plated iron | ||
washer |
The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance
Product cannot use in warranty period because of product quality problems
Product is damaged in transit
Product is not delivered in time because of our reason
Buyers send an email to our customer service to describe the problem, and to provide evidence (clear photos, screenshots, or video)
We will check the problem in 1 working days. For eligible cases, we will provide a free replacement or full refund within 1-2 business days
If a return is required, the return shipping fee will be paid by us
E2EY-X8C1 Proximity Switch NEW
Gross Weight | 0.19 |
---|